AgdaPkt 2015-03-23 Closed and Joint SA PFA

Browse Search

8.A. - Page 90 JinKO LIMITED WARRANTY REV.050114 Jinko Solar Import and Export Co., Ltd. ("Jinko") Actual Power Output shall be not less than 80% generally provides the Warranties set forth of the Nominal Power Output ("Limited Power herein to the original purchaser and its Warranty"). permitted successors and assigns ("Customer") with respect to all solar photovoltaic modules 4. POWER DEFINITIONS. "Nominal Power sold by Jinko under purchase agreements Output(P00)" means the original manufactured signed on or after May 1, 2014 ("Modules"), nameplate specification of the Module, subject to the terms and conditions herein expressed in Watts, as certified by Jinko and ("Limited Warranty"). Jinko and Customer may indicated on the Module, excluding any hereinafter be referred to each as a "Party" and specified positive tolerance. "Actual Power collectively as the"Parties". Output (POt)" means the power output of the Module, expressed in Watts, at Watt peak that 1. WARRANTY START DATE. Jinko provides the a Module generates at a given point in time in a Warranties set forth herein commencing upon year after the Warranty Start Date (t) in its the earlier of delivery of Modules to the original `Maximum Power Point' under Standard Test purchaser thereof or that date which is one Conditions, corrected for any measurement hundred and eighty (180) days following the error ("SIC"). SIC are as follows, measured in Module manufacture date, as indicated by the accordance with IEC 61215: (a) light spectrum serial number [digit no. 7 – 12 (YYMMDD), of AM 1,5; (b) an irradiation of 1000W per m2; starting from the left side of the serial number] and (c) a cell temperature of 25 degrees for such Module("Warranty Start Date"). centigrade at right angle irradiation. The "Degradation Rate (OR)" shall be any positive 2. LIMITED PRODUCT WARRANTY. Beginning on amount calculated in accordance with the the Warranty Start Date and terminating on following formula,expressed as a percent: that date which is one hundred and twenty(120) —� months thereafter, Jinko warrants that the DR=1.00–((Pot)/(POo)] Modules and their respective DC connectors 1 and cables, if any, shall be free from material 5. CLAIMS. Customer shall bear the burden of defects in design, materials and workmanship establishing a breach of the Warranties that affect the performance of the Module hereunder. If Customer believes there has been ("Limited Product Warranty"). Material defects a breach of the Limited Product Warranty or shall not include normal wear and tear. Limited Power Warranty (collectively, "Warranties"), then Customer shall promptly, 3. LIMITED POWER WARRANTY. Jinko warrants and not later than thirty (30) days after that the Degradation Rate shall not exceed the knowledge thereof, provide notice to Jinko following for the periods identified following setting forth the following information related the Warranty Start Date: (a) 10% by that date to the claim: (a) party making claim; (b) detailed which is twelve (12) years following the description; (c)evidence, including photographs Warranty Start Date, at which time the Actual and data; (d) relevant serial numbers; (e) Power Output shall be not less than 90% of the Warranty Start Date; (f) Module type; (g) Nominal Power Output; and (b) 20% by that physical address; (h) any additional evidence date which is twenty-five (25) years following reasonably requested by Jinko; and (i) upon the Warranty Start Date, at which time the request from Jinko, the actual Module(s) 1/4