Agmt15 CEI Solar One, LLC - Laserfiche WebLink

Browse Search

Exhibit B. Engineering and Construction Requirements • Fencing: the site shall be surrounded by a fence to prevent unauthorized personnel from gaining access the site.The fence shall be a eight (8)foot high chain link fence with vinyl privacy slats. • Gates shall be installed to enable site access for trucks. • A pathway a minimum of ten (10)feet wide passable by a maintenance truck shall be provided within the array fence to allow for access to all equipment enclosed within the fence area. • Access to water for maintenance (module cleaning) purposes, as determined adequate by Seller and approved by the Buyer. • Access to low voltage (120V)AC power to power maintenance equipment and miscellaneous equipment. • Seller shall install and ensure activation of sufficient security cameras on site to monitor array area, connected to the site's security system, in collaboration with the Buyer. • Seller will be responsible for installing an acceptable surface cover material under and around the modules and throughout the site that provides appropriate weed control, erosion and dust management. • Seller will be responsible for creating an access road to any ground mount system for maintenance and fire access purposes.The access road shall be passable under all weather conditions. 3.5.13 Lightning and S�rge Protection Seller shall utilize surge suppressors to protect the appropriate equipment from electrical surges. 3.5.14 Short Circuit Coordination As part of their design submittals,Seller shall identify overcurrent protective devices installed on the project(AC/DC fuses and AC/DC circuit breakers). Design submittals shall include calculations and demonstrate that the devices installed as part of the PV project are coordinated with the rest of each site's distribution, preventing an unintentional outage due to an isolated PV system fault. 3.5.15 Wiring and Cabling Runs • Seller shall install all AC conductors in conduit. • Direct burial wire will not be acceptable. Conduit buried underground shall be suitable for the application and compliant with all applicable codes. PVC shall be constructed of a virgin homopolymer PVC compound and be manufactured according to NEMA and UL specifications. All PVC conduit feeders shall contain a copper grounding conductor sized per NEC requirements and continuity shall be maintained throughout conduit runs and Exhibit B Page 14