Agmt15 CEI Solar One, LLC - Laserfiche WebLink

Browse Search

Exhibit B. Engineering and Construction Requirements 4.3 Line Location Seller will be responsible for locating, identifying and protecting existing underground utilities conduits, piping, substructures, etc. and ensuring that no damage is inflicted upon existing infrastructure. In addition to USA Dig and utility line-locating, a private line-locator must be used for any project requiring underground work. 4.4 Quality Assurance and Quality Control Seller shall implement a Quality Assurance / Quality Control (QA/QC) plan for construction activities on Buyer sites. At least 30 days prior to the planned commencement of construction, Seller shall submit a copy of the QA/QC Plan for review and approval by the Buyer. To ensure the highest quality of the installation, Seller shall: • Implement policies and procedures to ensure proper oversight of construction work, verification of adherence to construction documents and contractual requirements, and rapid identification and mitigation of issues and risks. • Utilize best practice methods for communicating progress, performing work according to the approved Project schedule, and completing the Project on-time. • Keep the Site clean and orderly throughout the duration of construction. All trash and rubbish shall be disposed of off-site by licensed waste disposal companies and in accordance with applicable Law. • Provide equipment marking, as well as labeling and signage for the Project that shall be removed after Project completion. • Fully comply with all applicable notification,safety and Work rules(including Buyer safety standards) when working on or near Buyer facilities. • Provide Special Inspection for trenching, rebar, concrete, welding, and roof attachment work, according to AHJ requirements. • Route all electrical collection system wiring and conduits in a neat and orderlyfashion and in accordance with all applicable code requirements. All cable terminations, excluding module-to-module and module-to-cable harness connections, shall be permanently labeled. • Torque all mechanical and electrical connections and terminations according to manufacturer specifications, with marking/sealing of all electrical terminations at appropriate torque point. • Provide all temporary road and warning signs,flagmen or equipment as required to safely execute the Work.Street sweeping services shall also be provided as required to keep any dirt, soil, mud, etc. off of roads. Comply with all state and local storm water pollution prevention (SWPP) ordinances. Exhibit B Page 21