Laserfiche WebLink
Exhibit B. Engineering and Construction Requirements <br /> o Check for proper operation and reporting of monitoring hardware. <br /> o Inspect sealed electrical components for condensation buildup. <br /> o Inspect wiring and hardware for signs of damage from vandalism or animal <br /> damage. <br /> • Routine system maintenance to include correction of loose electrical connections,ground <br /> connections, replacement of defective modules found during testing, other minor <br /> maintenance repair work. <br /> • Module cleaning, as deemed necessary by Seller. <br /> • Routine DAS maintenance to include sensor calibration and data integrity check. <br /> 6.2 Troubleshooting, Inspection and Additional Repairs <br /> Dispatch of field service resources (via automated or manual means) for repairs as necessary to <br /> maintain system performance. <br /> Seller will respond in a timely manner upon recognition of an alarm condition to ensure, using <br /> commercially reasonable efforts, that the Performance Guarantee requirements outlined in this <br /> Agreement are achieved. <br /> 6.3 Customer Service Support <br /> Support telephone line made available to Buyer staff to answer questions or report issues. <br /> Contact Seller at: <br /> Cupertino Electric, Inc. <br /> 1132 N 7th St. <br /> San Jose, CA, 95112 <br /> (408) 808-8000 <br /> 6.4 Major Component Maintenance and Repair <br /> • Inverter repair and component replacement and refurbishment as required in the event <br /> of inverter failure. <br /> • Inverter inspection and regular servicing as required under inverter manufacturer's <br /> warranty specifications.Those include but are not limited to the following annually: <br /> o Check appearance/cleanliness of the cabinet, ventilation system and all exposed <br /> surfaces. <br /> o Inspect, clean/replace air filter elements <br /> o Check for corrosion on all terminals, cables and enclosure. <br /> o Check all fuses. <br /> Exhibit B Page 26 <br />