Laserfiche WebLink
<br />Page 29 of 41 <br />ATTY/ORD.411/ZONING ORDINANCE AMENDMENTS <br />REV: 07-20-15 VR <br />3. All designated bicycle parking areas shall be clearly marked and equipped with <br />facilities necessary for protecting and securing bicycles. <br />GE. Motorcycle Parking. Every parking area with parking for one hundred (100) cars <br />or more shall have five (5) percent of its required parking spaces designated for <br />motorcycle parking. Motorcycle spaces must be a minimum of 4 feet wide and 6 feet <br />long. <br /> <br />30.7 Reserved. Parking Area Standards, Spaces and Aisles. <br />A. All parking areas with spaces for three (3) or more vehicles, which spaces are <br />intended to fulfill the off-street parking requirements prescribed in this article, shall <br />conform to the following standards: <br />1. Parking spaces, and circulation aisles necessary for the movement and turning <br />within a parking area and for maneuvering into and out of parking spaces, shall have <br />the minimum dimension as shown on the following table: <br />Minimum Parking Dimensions in Feet <br /> Stall Width Parallel to Aisle Stall Depth to Wall Aisle Width <br />45 degree <br />7.5 stall 10.6 17.0 11.0 <br />8.5 stall 12.0 19.5 13.0 <br />9.0 stall 12.7 19.5 12.0 <br />9.5 stall 13.4 19.5 11.0 <br /> <br />60 degree <br />7.5 stall 8.7 17.7 14.0 <br />8.5 stall 9.8 20.5 18.0 <br />9.0 stall 10.4 20.5 16.0 <br />9.5 stall 11.0 20.5 15.0 <br /> <br />75 degree <br />7.5 stall 7.8 17.3 17.4 <br />8.5 stall 8.3 20.0 24.0 <br />9.0 stall 9.3 20.0 23.0 <br />9.5 stall 9.8 20.0 22.0 <br /> <br />90 degree <br />7.5 stall 7.5 16.0 20.0 <br />6.5.A. - Page 31