Laserfiche WebLink
mm) for 24-inch (610 mm) stud spacing in accordance with Tables 23-I-M-1 and <br /> 23-I-N-1. <br /> 4. Fiberboard sheathing 4 foot by 8 foot (1219 mm by 2438 mm) panels <br /> not less than 1/2 inch (13 mm) thick applied vertically on studs spaced not over <br /> 16 inches (406 mm) on center when installed in accordance with Section 2315 <br /> and Table 23-I-P. <br /> 5. Particleboard wall sheathing panels where installed in accordance with <br /> Table 23-I-N-2. <br /> 6. Portland cement plaster on studs spaced 16 inches (406 mm) on <br /> center installed in accordance with Table 25-I limited to single story R-3 and U-1 <br /> occupancies. <br /> 7. Hardboard panel siding when installed in accordance with Section <br /> 2320.6 and Table 23-1-0, <br /> For methods 2, 3, 4, 5, 6, and 8 each braced wall panel must be at least <br /> 48 inches (1219 mm) in length, covering three stud spaces where studs are 16 <br /> inches (406 mm) apart and covering two stud spaces where studs are spaced 24 <br /> inches (610 mm) apart. <br /> For method 6, each braced wall panel must be at least 96 inches (2438 <br /> mm) in length when applied to one face of a braced wall panel and 48 inches <br /> (1219 mm) when applied to both faces. <br /> ORD-001 6 <br /> FXS:rg <br /> 10/23/95 <br /> 11/13/95R <br />