Reso PC17-06 0027 PC Reso 612 Jefferson

Browse Search

Stormwater Management and Discharge Control Program (Municipal Code Chapter 27A). The plans and BMPs shall be implemented during construction as detailed in Mitigation 16-3 of the DTPP EIR. [COA][ENGINEERING] 61. BAAQMD-Recommended Construction Control - The contractor shall implement the following Bay Area Air Quality Management District's Best Management Practices that are required of all projects: 1. All exposed surfaces (e.g., parking areas, staging areas, soil piles, graded areas, and unpaved access roads) shall be watered two times per day. 2. All haul trucks transporting soil, sand, or other loose material off-site shall be covered. 3. All visible mud or dirt track -out onto adjacent public roads shall be removed using wet power vacuum street sweepers at least once per day. The use of dry power sweeping is prohibited. 4. All vehicle speeds on unpaved roads shall be limited to 15 mph. 5. All roadways, driveways, and sidewalks to be paved shall be completed as soon as possible. Building pads shall be laid as soon as possible after grading unless seeding or soil binders are used. 6. Idling times shall be minimized either by shutting equipment off when not in use or reducing the maximum idling time to 5 minutes (as required by the California airborne toxics control measure Title 13, Section 2485 of California Code of Regulations [CCR]). Clear signage shall be provided for construction workers at all access points. 7. All construction equipment shall be maintained and properly tuned in accordance with manufacturer's specifications. All equipment shall be checked by a certified mechanic and determined to be running in proper condition prior to operation. 8. Post a publicly visible sign with the telephone number and person to contact at the Lead Agency regarding dust complaints. This person shall respond and take corrective action within 48 hours. The Air District's phone number shall also be visible to ensure compliance with applicable regulations. [COA][HUD EA] 62. Diesel Construction Equipment Selection — Implement the following measures to minimize emissions from diesel equipment: 1. All diesel -powered off-road equipment larger than 50 horsepower and operating at the site for more than two days continuously shall meet U.S. EPA particulate matter emissions standards for Tier 4 engines or equivalent; 2. All stationary pieces of construction equipment shall use best available control technology to reduce particulate matter or shall be gasoline- or alternative energy -powered. ATfY/RESO.0027/PC RESO 612 JEFFERSON REV: 03-21-17 PR Page 18 of 22