Laserfiche WebLink
<br />1/10/2005 <br /> <br />ARTICLE II. DEFINITIONS <br /> <br />Sec. 41.2.1. DEFINITIONS: Unless specifically defined in this Article, <br />words or phrases used in this Chapter shall be interpreted so as to give them the <br />meaning they have in common usage and to give this Chapter its most reasonable <br />application. <br /> <br />ACCESSORY USE means a use which is incidental and subordinate to the principal <br />use of the parcel of land on which it is located. <br /> <br />ALLUVIAL FAN means a geomorphologic feature characterized by a cone or fan- <br />shaped deposit of boulders, gravel, and fine sediments that have eroded from mountain <br />slopes, transported by flood flows, and then deposited on the valley floors, and which is <br />subject to flash flooding, height velocity flows, debris flows, erosion, sediment <br />movement and deposition, and channel migration. <br /> <br />APEX means the point of highest elevation on an alluvial fan, which on undisturbed fans <br />is generally the point where the major stream that formed the fan emerged from the <br />mountain front. <br /> <br />APPEAL means a request for a review of the Floodplain Administrator's interpretation of <br />any provision of this Chapter. <br /> <br />AREA OF SHALLOW FLOODING means a designated AO or AH Zone on the Flood <br />Insurance Rate Map (FIRM). The base flood depths range from one to three feet; a <br />clearly defined channel does not exist; the path of flooding is unpredictable and <br />indeterminate; and velocity flow may be evident. Such flooding is characterized by <br />ponding or sheet flow. <br /> <br />AREA OF SHALLOW FLOOD HAZARD - See "Special flood hazard zone." <br /> <br />BASE FLOOD means a flood having a one percent (1%) chance of being equaled or <br />exceeded in any given year (also called the "1 DO-year flood"). Base flood is the term <br />used throughout this Chapter. <br /> <br />BASEMENT means any area of the building having its floor subgrade (i.e., below <br />ground level on all sides). <br /> <br />BREAKAWAY WALLS are any type of walls, whether solid or lattice, and whether <br />constructed of concrete, masonry, wood, metal, plastic or any other suitable building <br />material which is not part of the structural support of the building and which is designed <br />to break away under abnormally high tides or wave action without causing any damage <br />to the structural integrity of the building on which they are used or any buildings to which <br />they might be carried by floodwaters. A breakaway wall shall have a safe design- <br />loading resistance of not less than ten (10) and no more than twenty (20) pounds per <br /> <br />Atty/OrdlOrd.223 <br />120104 <br /> <br />3 <br /> <br />2277 <br />Muff # 802 <br />