Laserfiche WebLink
Exhibit 6 <br /> ( 5.1 Bring Unit On Duty <br /> This test verifies that the dispatcher can bring units on duty and reassigned to another patrot area. <br /> Test Procedure <br /> 1. Sefect the Bring Unit On Duty command. <br /> 2. Select a unit that is currently not on duty. <br /> 3. Sefect a patrol area other than the units normally assigned patrof. <br /> 4. Put in an odometer number. <br /> 5. Execute the command. <br /> Expected resuits <br /> From unit details, verify the unit is on duty and assigned to the new patrol area. <br /> 5.2 Bring Unit Off Duty <br /> This test verifies that the dispatcher can bring units off duty. <br /> Test Procedure <br /> 1. Select the take unit off duty command. <br /> 2. Select a unit that is cnrrently on duty. <br /> 3. Put in an odometer number <br /> 4. Execute the command. <br /> Expected results <br /> � Verify the unit is off duty.Verify the odometer reading in the unit log <br /> 5.3 Unit Log <br /> This test verifies that unit logs accurately track what units do. <br /> Test Procedure <br /> 1. Add several new calls. <br /> 2. Assign a given unit to these calls. <br /> 3. Have the unit go on and off duty. <br /> 4. Make several patrol changes for the unit. <br /> 5. View the unit log for the unit. <br /> Expected Results <br /> Verify the unit log shows every status change for the given unit. <br /> 5.4 Roll Call <br /> This test verfies that the CAD dispatcher can take a roll call for all on duty units. <br /> Test Procedure <br /> 1. Take the roll call for half hour. <br /> 2. Record the roll call. <br /> 3. Take a roll call for full hour. <br /> LUCENT TECHNOLOGIES - PROPRIETARY <br /> Use Pursuant to Company Instructions - <br /> Revised: 03117199 Page 11 <br /> __.. <br /> _ _. _ <br />