Agmt99 Lucent Technologies - Laserfiche WebLink

Browse Search

Exhibit B � Test Procedure 1. From Local Configuration,tum on the wam for EMS move-up configuration option. 2. Add several EMS move-up scenarios. 3. Dispatch several EMS units from one station. 4. View the cunent EMS situation. 5. View the EMS move-up scenario. Expected results Verify the corre�ct EMS situation and move-up scenario is shown to the dispatcher.Verify the dispatcher is given a waming regarding an EMS move-up situation. 6.3 Reports This test verifies that pred�ned report can be generated and contain the correct data. Test Procedure 1. Start the CAD report module. 2. Run and print a department activity report. 3. Run and print a#of calts report. 4. Run and print a unit activi#y report. 5. Run and print a response time report. 6. Run and print a blodc activity report. 7. Run and print a call log report. 8. Run and print a bad address report. 9. Run and print a man power report. 10. Run and print a false atarm report. � 11. Run and print a GEO fail report. 12. Run and print a press release report. 13. Run and print adhoc reports. Expected Results Verify that reports print and that the data contained in each report is accurate. 6.4 GEO Validation This test verifies that GEO validation is done correctly. TestProced�re 1. Add a new call for a location that is not in the GEO database. 2. Add a new caN for a location that is in the GEO database. 3. Add a new cali using an intersection for the location field. Expected Resutts Verify the call that is not in the GEO database selects the Gosest address to the one given. 6.5 ALI Feed This test check that CAD dispatchers can receive ALI data for a new CAD call when there is a corresponding voice call which deliveries ALI data. It will also check that an ALI call can be pfaced on hold and released. Test Procedure LUCENT TECHNOLOGIES -PROPRIETARY Use Pursuant to Company Instructions � Revised: 03/17/99 Page 13 . _�_._.. _ _ _.. ___ .