Agmt18 National Plant Services, Inc.

Browse Search

in the following PACP format: A. Surveyed By B. Street C. Locations Code D. Direction of inspection E. Pipe material F. Pipe diameter G. Length of reach to be televised H. Manhole number from which the camera is traveling I. Manhole number to which the camera is traveling J. Pipe ID K. Inspection Time/Date In addition, each recording shall continuously display the following information: A. City B. Number of the manhole from which the camera is traveling C. Number of the manhole to which the camera is traveling D. Direction of flow (indicated by arrow) E. Date of recording F. Pipe diameter G. Pipe material H. Footage Contractor shall take at least one picture of all mid -to -major defects in pipe that will be in JPEG format. Each JPEG file will be named in accordance with the line and footage. One photograph shall also be taken of each lateral connection looking up into the lateral. Contractor shall setup at the upstream manhole whenever possible to video inspect with the flow. The camera will move at a uniform rate at a speed no greater than 30 feet per minute. Distance of the line will be measured and recorded from the center of manhole to the center of the next manhole. The distance will be accurate within 2 feet of every 1000 linear feet inspected. If more than one manhole reach is inspected in a single run, the footage counter shall be reset to zero at the center of all intermediate manholes. The camera shall pause for a sufficient amount of time to adequately document and provide accurate distance measurements of all defects in pipe and the connections observed in the line. The camera shall rotate and look directly at each defect and look into each connection to thoroughly document the conditions and determine if the lateral is in service. Contractor shall capture photos of any moderate and above damages or abnormal conditions. The recording shall include an audio portion describing the condition of the lines with the video image. The audio portion will be sufficiently free of background noise to produce an oral report that clear and easily discernible. At the beginning of each inspection run, the audio shall identify Contractor's name, the crew member, date, time, street location, name of line, pipe size, pipe material, direction of inspection, and the pipe numbers at the beginning and end of the reach. The Page 10 of 14 REV: 06-29-18 PR ATTY/AGR.2018.148/National Plant Services, Inc.