Laserfiche WebLink
6.13. - Page 12 of 13 <br />EXHIBIT A <br />Neighborhood Compatibility: Guiding Principles <br />12/3/2018 <br />1. Streetscape Frontage <br />Maintain a compatible streetscape frontage through design features such as placement and <br />size of the front entry feature, placement of the garage, width of building massing, front setback <br />depth, and retention of mature landscaping and trees. Guiding principles include: <br />Garages — Place new garages in locations similar to the pattern common in the <br />neighborhood: <br />o In neighborhoods which have a strong pattern of garages located at the rear of lots <br />behind the house, that pattern should be repeated. <br />o In neighborhoods where the garage is not a prominent feature of the house, <br />provide additional stepbacks from the front fagade so that the garage is clearly <br />secondary to the house, . A one -car garage may also <br />be considered. <br />Building Width — i i+�If the immediately adjacent structures have larger than required <br />side yard setbacks (typically for detached garage access) that result in narrower homes, <br />utilize floor plans w4t#that also have narrower widths near the front, espeGially On lots; <br />to maintain a consistent streetscape frontage. <br />Front Entry — In neighborhoods where homes have a clearly defined front entry, the <br />proposed design should also incorporate a front entry feature. <br />o Front entry features should be compatible with the proposed architectural style. <br />o Front entry features should be human scale and not taller than the first floor eave <br />height. <br />Landscaping— Maintain theWhere appropriate, maintain any existing; mature landsGape <br />pattern On the neighbowh� ding trees and <br />featuresdrought-tolerant landscaping pattern. <br />2. Massing and Design <br />Promote massing and design that is compatible with neighboring structures through building <br />placement, roof design, setbacks, and additional second story stepbacks. Guiding principles <br />include: <br />Building Placement and Design — The existing development pattern for building placement <br />should be considered +4for the design of the new structure or addition. <br />o Contextual setbacks —Where there is a strong neig hborho pattern, the proposed <br />structure should utilize front and side setbacks that thatgenerallyalign with <br />structures that front the same street beab.veep sss+�eefics -as the proposed <br />structure. In some cases, additional setback beyond the minimum is appropriate. <br />o Orientation - If there is a strong pattern for a specific orientation of the home <br />(garage and driveway location, front entry placement, window placement, second <br />story massing location), consider utilizing similar orientation of the new home or <br />addition. <br />Al <br />