Laserfiche WebLink
vii. LED Driver shall have input voltage range of 120-277 +-10%. <br />viii. LED Driver shall of a life rating of less than .5% failure rate at 100,000 <br />operating hours (at full rated power and operating ambient temperature of <br />25 degrees C). <br />ix. Upon receiving a 0-10V signal, LEDs shall dim down to at least 10% power. <br />Driver must include leads to accept a 0-10V signal. <br />e. Photocontrol receptacle shall comply with ANSI C136.41 for standard 7 PIN <br />configurations. The 7pin photocontrol receptacle shall be accessible, installed <br />and prewired in each luminaire. <br />i. Luminaire shall include a long life solid-state locking -style photo control <br />with a 20- year rated life and a minimum 10 -year warranty. <br />ii. DESIGN DETAILS <br />a) LED inrush protection with triac assisted relay <br />b) Extreme surge protection of 1280J/40kA utility or 2120J/40kA UL <br />listed <br />c) Double thick enclosure and lens with additional UV inhibitor <br />d) High Temperature base plastic tested to 140°C <br />e) Long life capacitors <br />f) Full wave rectified power supply <br />g) Dual zener diodes for long life <br />h) Solid brass contact blades <br />i) Double sided, thru hole plated .062" FR4 circuit board <br />j) Conformal coated printed circuit board <br />k) Sealed packaging for extended storage <br />iii. REGULATORY LISTINGS <br />a) ANSI C136.10 <br />b) ROHS compliant <br />c) UL listed to U.S. and Canadian safety standards <br />d) Surge rated in excess of ANSI C136.10 to 20kV/10kA <br />iv. OPERATING CHARACTERISTICS <br />a) Voltage 120 to 480 VAC, 60Hz <br />b) Load rating: 1000 watts, 1800 VA ballast <br />c) Average power consumption: <0.5 watts @ 120V <br />V. Luminaire and Photo Control shall be manufactured by the same <br />manufacturer. <br />D. LIFE FOR LED LIGHT FIXTURES <br />1. Component rated life shall be a minimum of 20 years (or 100,000 hours) when operating <br />in a continuous 25C ambient. <br />2. The design life of the LED array (based on LM80/TM21) shall have a minimum LED lumen <br />depreciation of .95 at 100,000 hours operating at 25 degrees C. <br />E. WARRANTY FOR LED LIGHT FIXTURES <br />1. Luminaire shall be warranted to be free from manufacturing defects for a period of 10 <br />years. <br />F. PERFORMANCE & SPECIFICATION FOR LED FIXTURE TYPES A THROUGH F <br />1. Correlated Color Temperature (CCT) shall be nominally rated at 3000K CCT. <br />a. Allowable CCT ranger per NEMA C78.337 shall be 2870K to 3220K for 3000K <br />rated luminaire. <br />2. Minimum Color Rendering Index (CRI) shall be 70 for 3000K CCT rated luminaire. <br />3. Product shall be on the Design Lights Consortium (DLC) Qualified Products List. <br />4. LED lighting manufacturer shall have no less than five years' experience in manufacturing <br />LED -based roadway cobra head luminaires. <br />REV: 05-05-2020 MI <br />ATTY/AGR.Amend. NoA/AII Industrial Electric Supply, Inc. (Page 6 of 9) <br />