Laserfiche WebLink
[Article 8 (Multi -Family — Low Density), Section 8.8 is amended as follows] <br />8.8 — Lot Coverage and Floor Area Ratio. <br />A. Not more than sixty (60) percent of the lot shall be covered by buildings. <br />B. Total Floor Area Ratio for single-family dwellings is limited to <br />Maximum dwelling size of 2.500 sq. ft. or 40 percent, whichever is greater. <br />See Article 48 (Interim Floor Area Ratio) for methods of calculations and <br />exceptions. <br />[All other sections remain unchanged] <br />[Article 9 (Multi -Family — Medium Density), Section 9.8 is amended as follows] <br />9.8 — Lot Coverage and Floor Area Ratio. <br />A. Not more than sixty (60) percent of the lot shall be covered by buildings. <br />B. Total Floor Area Ratio for single-family dwellings is limited to <br />Maximum dwelling size of 2.500 sq. ft. or 40 percent, whichever is greater. <br />See Article 48 (Interim Floor Area Ratio) for methods of calculations and <br />exceptions. <br />[All other sections remain unchanged] <br />[Article 10 (Residential — High Density), Section 10.8 is amended as follows] <br />10.8 — Lot Coverage and Floor Area Ratio. <br />A. Not more than sixty (60) percent of the lot shall be covered by buildings. <br />B. Total Floor Area Ratio for single-family dwellings is limited to <br />Maximum dwelling size of 2.500 sq. ft. or 40 percent, whichever is greater. <br />See Article 48 (Interim Floor Area Ratio) for methods of calculations and <br />exceptions. <br />[All other sections remain unchanged] <br />[New Article 48 is added to read as follows] <br />Page 4 of 8 <br />ATTY/RESO.0066/PC RESO FAR RESOLUTION <br />REV: 06-20-19 PR <br />