Laserfiche WebLink
8.A. - Page 18 of 85 <br />[Article 8 (Multi -Family — Low Density), Section 8.8 is amended as follows] <br />8.8 — Lot Coverage and Floor Area Ratio. <br />A. Not more than sixty (60) percent of the lot shall be covered by buildings. <br />B. Total Floor Area Ratio for single-family dwellings is limited to a maximum dwelling <br />size of 2.500 sq. ft. or 40 percent, whichever is greater. <br />See Article 48 (Floor Area Ratio) for methods of calculations and exceptions. <br />[All other sections remain unchanged] <br />[Article 9 (Multi -Family — Medium Density), Section 9.8 is amended as follows] <br />9.8 — Lot Coverage and Floor Area Ratio. <br />A. Not more than sixty (60) percent of the lot shall be covered by buildings. <br />B. Total Floor Area Ratio for sinqle-family dwellings is limited to a maximum dwelling <br />size of 2,500 sq. ft. or 40 percent, whichever is greater. <br />See Article 48 (Floor Area Ratio) for methods of calculations and exceptions. <br />[All other sections remain unchanged] <br />[Article 10 (Residential — High Density), Section 10.8 is amended as follows] <br />10.8 — Lot Coverage and Floor Area Ratio. <br />A. Not more than sixty (60) percent of the lot shall be covered by buildings. <br />B. Total Floor Area Ratio for sinqle-family dwellings is limited to a maximum dwelling <br />size of 2,500 sq. ft. or 40 percent, whichever is greater. <br />See Article 48 (Floor Area Ratio) for methods of calculations and exceptions. <br />[All other sections remain unchanged] <br />ATTY/ORD.492/CC ORDINANCE FAR <br />REV: 08-19-19 PR <br />Page 5 of 9 <br />294 <br />