AgdaPkt 2019-09-23 Joint SA PFA - Laserfiche WebLink

Browse Search

Ordinance No. 1057 Page 6 4. All electrical components, includinq conductors, receptacles, junction boxes, or blank covers, related to this section shall be installed in accordance with the California Electrical Code. Note 2: If any of the exceptions 1-4 are granted, the Building Official shall have the authority to approve alternative materials, design and methods of construction or equipment per CBC 104. Section 100.1(b) is modified by addina the followina definitions ALL ELECTRIC BUILDING: is a building that has no natural gas or propane plumbing installed within the building, and that uses electricity as the source of energy for its space heating, water heating, cooking appliances, and clothes drying appliances. All Electric Buildings may include solar thermal pool heating. Scientific Laboratory Building: is a building or area where research, experiments, and measurement in medical, and life sciences are performed and/or stored requiring examination of fine details. The building may include workbenches, countertops, scientific instruments, and supporting offices. Section 100.1 is modified as follows: SHADING — is the protection from heat gains because of direct solar radiation by permanently attached exterior devices of building elements, interior shading devices, glazing material, adherent materials, including items located outside the building footprint such as Heritage trees or high rise buildings that may affect shading. Section 110.2 is modified as follows: SECTION 110.2 — MANDATORY REQUIREMENTS FOR SPACE -CONDITIONING EQUIPMENT Certification by Manufacturers. Any space -conditioning equipment listed in this section, meeting the requirements of section 100.0 (e)2A, may be installed only if the manufacturer has certified to the Commission that the equipment complies with all the applicable requirements of this section. Section 110.3 is modified as follows: SECTION 110.3 —MANDATORY REQUIREMENTS FOR SERVICE WATER -HEATING SYSTEMS AND EQUIPMENT (a) Certification by manufacturers. Any service water -heating system or equipment, meeting the requirements of section 100.0 (e)2A, may be installed only if the manufacturer has certified that the system or equipment complies with all of the requirements of this subsection for that system or equipment. Section 110.4 is modified as follows: SECTION 110.4 — MANDATORY REQUIREMENTS FOR POOL AND SPA SYSTEMS AND EQUIPMENT (a) Certification by Manufacturers. Any pool or spa heating system or equipment, meeting the requirements of section 100.0 (e)2A, may be installed only if the manufacturer has certified that the system or equipment has all of the following: