My WebLink
|
Help
|
About
|
Sign Out
Browse
Search
Ord 2403
RedwoodCity
>
City Clerk
>
Resolutions
>
City Council
>
Working
>
Ordinances
>
2010-2019
>
Ord 2403
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
10/11/2019 2:49:32 PM
Creation date
10/11/2019 2:49:30 PM
Metadata
Fields
Template:
CC Index
CC Index - Document Type
Ordinance
Meeting Type
Regular
Agency Type
City Council
Date
1/13/2014
Description
AN ORDINANCE OF THE CITY OF REDWOOD CITY REPEALING ARTICLES IV, V, VI, VII, VIII AND X OF CHAPTER 9 OF THE REDWOOD CITY MUNICIPAL CODE AND ADOPTING NEW ARTICLES IV, V, VI, VII, VIII, AND IX OF CHAPTER 9 OF THE REDWOOD CITY MUNICIPAL CODE ADOPTING TITLE 24, PARTS 2, 2.5, 3, 4, 5, 6, 8, 10 AND 11 OF THE CALIFORNIA CODE OF REGULATIONS, NAMELY THE 2013 CALIFORNIA BUILDING, RESIDENTIAL, ELECTRICAL, MECHANICAL, PLUMBING, ENERGY, HISTORICAL BUILDING, EXISTING BUILDING, AND GREEN BUILDING STANDARDS CODES, TOGETHER WITH CERTAIN AMENDMENTS, EXCEPTIONS, MODIFICATIONS AND ADDITIONS, THERETO
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
10
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
01/13/2014 <br /> Section 2603.4.1.5 Roofing. Foam plastic insulation under a roof assembly or <br /> roof covering that is installed in accordance with the code and the manufacturer's <br /> instructions shall be separated from the interior of the building by wood structural <br /> panel sheathing not less than 0.47 inch (11.9 mm) in thickness bonded with <br /> exterior glue, with edges supported by blocking, tongue-and-groove joints or <br /> other approved type of edge support, or an equivalent material. A thermal barrier <br /> is not required for foam plastic insulation that is a part of a Class A or B roof- <br /> covering assembly, provided the assembly with the foam plastic insulation <br /> satisfactorily passes FM 4450 or UL 1256. <br /> Sec. 9.59. SECTION J102.1, APPENDIX J OF THE BUILDING CODE AMENDED: <br /> Section J102.1, Appendix J of the Building Code is hereby amended to add the <br /> definition of Engineered Grading: <br /> Section J102.1. Definitions. For the purpose of this appendix chapter, the terms, <br /> phrases and words listed in this section and their derivatives shall have the <br /> indicated meanings. <br /> BENCH. A relatively level step excavated into earth material on which fill is to be <br /> placed. <br /> COMPACTION. The densification of a fill by mechanical means. <br /> CUT. See excavation <br /> DOWN DRAIN. A device for collecting water from a swale or ditch located on or <br /> above a slope, and safely delivering it to an approved drainage facility. <br /> ENGINEERED GRADING. An excavation greater than finro (2) feet in depth; <br /> where cut slope is greater than five (5) feet in height; where fill is to be placed on <br /> natural grade steeper than 20% (1:5 ratio); where fill is greater than three (3) <br /> feet in height; where fill supports a structure; or which consist of more than 50 <br /> cubic yards. <br /> EROSION. The wearing away of the ground surface as a result of the movement <br /> of wind, water or ice. <br /> EXCAVATION. The removal of earth material by artificial means also referred to <br /> as a cut. <br /> FILL. Deposition of earth materials by artificial means. <br /> GRADE. The vertical location of the ground surFace. <br /> GRADE, EXISTING. The grade prior to grading. <br /> GRADE, FINISHED. The grade of the site at the conclusion of all grading efforts. <br /> ATTY/ORD.398/BUILDING CODE ADOPTION ORD.#2403 <br /> REV:11-22-13 JS FORMERLY MUFF#305 <br /> Page 5 of 9 <br />
The URL can be used to link to this page
Your browser does not support the video tag.