My WebLink
|
Help
|
About
|
Sign Out
Browse
Search
Ord95 2102
RedwoodCity
>
City Clerk
>
Resolutions
>
City Council
>
Working
>
Ordinances
>
1990-1999
>
Ord95 2102
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
10/11/2019 3:06:43 PM
Creation date
10/11/2019 3:06:40 PM
Metadata
Fields
Template:
CC Index
CC Index - Document Type
Ordinance
Agency Type
City Council
Date
11/27/1995
Description
ORDINANCE NO. 2102 ORDINANCE REPEALING ARTICLES IV, V, VI, VII, AND VIII OF CHAPTER 9 OF THE CODE OF THE CITY OF REDWOOD CITY; ADDING ARTICLES IV, V, VI, VII, AND VIII OF CHAPTER 9 TO THE CODE OF THE CITY OF REDWOOD CITY RELATING TO THE ESTABLISHMENT OF REGULATIONS AND STANDARDS FOR BUILDINGS AND STRUCTURES IN THE CITY OF REDWOOD CITY AND ADOPTING BY REFERENCE THE FOLLOWING CODES: "THE UNIFORM BUILDING CODE 1994 EDITION"; "THE UNIFORM BUILDING SECURITY CODE, 1994 EDITION"; "THE UNIFORM HOUSING CODE, 1994 EDITION"; "THE UNIFORM MECHANICAL CODE, 1994 EDITION"; "THE UNIFORM PLUMBING CODE, 1994 EDITION"; AND "THE NATIONAL ELECTRICAL CODE, 1993 EDITION" "ARTICLE IV. BUILDING CODES" THE COUNCIL OF REDWOOD CITY DOES ORDAIN AS FOLLOWS
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
28
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
retard capillary action. Two (2) inches of sand shall be provided between the <br /> vapor barrier and the concrete slab. The top of the concrete floor slab shall be a <br /> minimum six (6) inches above exterior finished grade." <br /> "Section 9.46. Section 2326.11.3 of the Building Code is hereby <br /> amended to read as follows: <br /> "Section 2326.11.3 Bracing. Braced wall lines shall consist of braced <br /> wall panels which meet the requirements for location, type, and amount of <br /> bracing specified in Table 23-I-W and are in line or offset from each other by not <br /> more than 4 feet (1219 mm). Braced wall panels shall start at not more than 8 <br /> feet (2438 mm) from each end of a braced wall line. All braced wall panels shall <br /> be clearly indicated on the plans. Construction of braced wall panels shall be by <br /> one of the following methods: <br /> 1. Nominal 1-inch by 4-inch (25 mm by 102 mm) continuous diagonal <br /> braces let into top and bottom plates and intervening studs, placed at an angle <br /> not more than 60 degrees or less than 45 degrees from the horizontal, and <br /> attached to the framing in conformance with Table 23-I-Q. <br /> 2. Wood boards of 5/8 inch (16 mm) net minimum thickness applied <br /> diagonally on studs spaced not over 24 inches (610 mm) on center. <br /> 3. Wood structural panel sheathing with a thickness not less than 5/16 <br /> inch (7.9 mm) for 16-inch (406 mm) stud spacing and not less than 3/8 inch (9.5 <br /> ORD-001 5 <br /> FXS:rg <br /> 10/23/95 <br /> 11/13/95R <br />
The URL can be used to link to this page
Your browser does not support the video tag.