Agmt08 Sensus Metering Systems - Laserfiche WebLink

Browse Search

TGB Site Responsibilities: Sensus Metering Systems will: 1. Hire a qualified installation team to install the TGB equipment at the designated site(s). 2. Perform all data, power and terminal connections at the TGB cabinet. This includes the AC power source (supplied by the customer), coaxial cable from the TGB antenna, and CATS data cable (to be supplied by the customer) for data backhaul to the RNI servers. 3. Provide the appropriate antenna to be used at each TGB site. 4. Provide all bracketing needed to mount the TGB antenna at the TGB site. 5. Provide coaxial cable required to connect the TGB cabinet to the TGB antenna. 6. Provide all hardware required to install coaxial cable between TGB cabinet to the TGB antenna. 7. Install the TGB cabinet (if needed) at or in the structure provided and identified by the customer. 8. Sensus will not be held responsible for damage to any interior or exterior coatings on water tanks that results from welding of antenna mounts to those tanks. Parties will mutually agree to the scope of work prior to the installation. The Customer will: 1. Provide sufficient foundation to secure the TGB cabinet. Should an outdoor cabinet be at the TGB site, this foundation will consist of a concrete pad or steel structure that is designed to hold 600 Ibs per square inch. 2. Provide a proper ground field at each TGB site. At a minimum, the material should consist of # 4 or #2 stranded copper wire which will connect to the TGB. 3. Provide a clean and reliable 120 VAC power source for the TGB cabinet in the desired location. Outdoor (NEMA-4) TGB cabinets require a 240 VAC power source due to climate control equipment included. 4. 120 VAC (or 240 VAC for outdoor TGB cabinets) non-GFI receptacles to be located within 1 foot of the final location of the TGB cabinet. 5. Provide the necessary trenching, conduit, and cabling needed to install AC receptacles within 1 foot of the final location of the TGB cabinet. All electrical equipment must be installed in accordance with local codes, and is the responsibility of the customer. 6. Provide TCP/IP network backhaul connection at all TGB sites. Customer should consult with Sensus Project Manager to determine the best available options for TCPIIP data backhaul. 7. Provide CATS UV and weather resistant network cable between the TGB cabinet and TCP/IP data backhaul connection. 8. Be responsible to provide any conduit or trenching needed to run the TCP/IP data backhaul cable to the TGB cabinet. 9. Provide padlocks for the TGB cabinet if required for security purposes. 10. Secure access/permission to any structure that is not owned by the customer.