Laserfiche WebLink
6.G. - Page 76 of 124 <br />- Two (2) Drawer(s) 4" High x 24" Wide x 17.5" Deep <br />One (1) Drawer(s) 6" High x 24" Wide x 17.5" Deep <br />Horizontal Compartment: <br />48" Wide x 18" High x 225" Deep Compartment <br />- One (1) Adjustable Shelf <br />- Diviner Slots on 2" Centers, with Seven (7) Adjustable Dividers <br />Rear Vertical Compartment: <br />ATTACHMENT B <br />October 14, 2026 <br />26" 'Wide x 38" High x 22.S" Deep Compartment <br />- Two (2) Adjustable Shelves <br />- Divider Slats on 2" Centers, with. Four (4) Adjustab€e Dividers <br />This. compartment to be reinforced for 3,500 lbs. - 6,000 crane mounting (18,001 - 36,04.0 Ft/Lbs.) <br />Full Step 6" Long Rear Bumper: <br />Full width step 6" long x 94" wide with treadplate top <br />Powder coat white <br />Exterior Lighting, <br />- 7 Lamp Located in the Bumper; <br />- Two (2) Stop/Tail/Turn Lights - Peterson Brand M826R-7 L.E.D (PN# 30660) <br />- Two (2) Clear Back Up Lights - Peterson Brand M826C-7 L.E.D (PN# 30703) <br />- Two (2) Front Clearance Lights- TecNiq S34 AA9B-1 (PN# 30810) <br />- Wired to Rear Clearance Light Circuit <br />- Two (2) Side Clearance Lights -- TecNiq S37 -RR -9B-1 (PN# 30809) <br />- Two (2) Rear Clearance Lights - TecNiq S37 -RR -9B-1 (PN## 34809) <br />a Three (3) Light Center Cluster - TecNiq S37 -RR -9B-1 (PN# 30809) <br />Punched steel headache rack: <br />94" wide x 24" High 14 gauge galvanneal Punched with a 1 112" x 1 112" angle frame out at taper <br />- Light bar mounting plate on top. <br />- Paintsame as body <br />Tailgate: <br />8" Galvaneal SB Style Hinged Tailgate to be Installed at Rear of Load Space <br />- Slam Style Latching <br />Storage Compartment. (To be discussed at the Pre -Construction Mi eting) <br />A 6" high x 12" wide x 75" deep storage compartment will be provided under the cargo area floor for <br />storage of pipe. <br />a Page 4 <br />324 <br />