Ord22 227 - Laserfiche WebLink

Browse Search

of the standing studding, and all solidly blocked behind the ribbon on the line of the spring of the Gove. Bearing partitions shall have double plates. Double studs shall be used on the sides and top of all openings with. heads and truss braces aut in and secured. Anohors and Ties SECTION 26. Where a steel beam aoting as a girder or a tie beam rests upon a bri<iJk wall it s&a11 have an anohor made of two angles riveted to the end of the beam andprojeoted at least six inches on each side. Where weoden girders rest upon wells the~ shall have fa.stened thereto by two iron anchors of at least t square inch in section at least 3 feet lOBi, mdwith iron washers at the outer end at least six inohes by six inohes by three-eights of an inah. The other erd shall be turned down at least two inohes and fastened to the girders in Buoh a way that the anshor is self releasing. Box e..nchors answering the same requirements may be ueed." Where wooden joists rest upon walle they shall be fastened with anchors as required for girders, one anohor being used in every eight feet of wall. Where girders or joiets para.11el a wall they shall be anohorcld every eight feet in the same manner. Girders resting on oolumns shall be anohored thereto or to the next girder with two iron tie straps of at least one half square inGh section. JoiBts resting on girders she.ll be lapped one foot and spiked together or shall be o~~nected with iron straps of at least one half equare inoh croes section. One such strap shall be used every eight feet along the girder and tIloee joists having well anohor.e shall be strapped, the object beini to form a o9ntinuou8 tie acr08S the building. Floore SECTION 27. Floors sball be built with timber joists laid as prescribed l~ ./