Laserfiche WebLink
<br />Pipeline Crossing 07/20/08 <br />Form Approved, A VP-Law <br /> <br />EXHmIT D <br /> <br />MINIMUM SAFETY REQUIREMENTS <br /> <br />The term "employees" as used herein refer to all employees of Licensee or its contractors, subcontractors, <br />or agents, as well as any subcontractor or agent of any Contractor. <br /> <br />I. Clothing <br /> <br />A. All employees will be suitably dressed to perform their duties safely and in a manner that <br />will not interfere with their vision, hearing, or free use of their hands or feet. <br /> <br />Specifically, employees must wear: <br /> <br />(i) Waist-length shirts with sleeves. <br />(ii) Trousers that cover the entire leg. If flare-legged trousers are worn, the trouser <br />bottoms must be tied to prevent catching. <br />(iii) Footwear that covers their ankles and has a defined heel. Employees working on <br />bridges are required to wear safety-toed footwear that conforms to the American <br />National Standards Institute (ANSI) and FRA footwear requirements. <br /> <br />B. Employees shall not wear boots (other than work boots), sandals, canvas-type shoes, or <br />other shoes that have thin soles or heels that are higher than normal. <br /> <br />C. Employees must not wear loose or ragged clothing, neckties, finger rings, or other loose <br />jewelry while operating or working on machinery. <br /> <br />II. Personal Protective Equipment <br /> <br />Employees shall wear personal protective equipment as specified by Railroad rules, regulations, <br />or recommended or requested by the Railroad Representative. <br /> <br />(i) Hard hat that meets the American National Standard (ANSI) Z89.1 - latest revision. <br />Hard hats should be affixed with Contractor's company logo or name. <br />(ii) Eye protection that meets American National Standard (ANSI) for occupational and <br />educational eye and face protection, Z87.1 - latest revision. Additional eye protection <br />must be provided to meet specific job situations such as welding, grinding, etc. <br />(iii) Hearing protection, which affords enough attenuation to give protection from noise levels <br />that will be occurring on the job site. Hearing protection, in the form of plugs or muffs, <br />must be worn when employees are within: <br /> <br />· 100 feet of a locomotive or roadway/work equipment <br />· 15 feet of power operated tools <br />· 150 feet of jet blowers or pile drivers <br /> <br />