Agmt09 South Bay Recycling, LLC - Laserfiche WebLink

Browse Search

SBWMA San Carlos, CA Order Confirmation 7177 - R 4 June 30, 2009 <ii;~___N_____"--",--'--'-- Screen Width: IFO: Discs: Shafts: Bearings: Sprockets: Chain: Motor(s): Reducer( s): Frequency Drive(s): Drive System: Angle: Access Door: Auto-lube: Chutes: 98" wide screening surface. To be determined. Patented, 3" thick inline tri-discs #Al-762 with compound configuration for accurate material sizing. Two (2) screening sections with patented rollover between the two (2) screening sections to facilitate the release of trapped contaminants through the screening surface. Section 1 will have eleven (11) shaft assemblies, and section 2 will have eight (10) shaft assemblies on 21" centers. Pillow block bearings. Hardened double-single timed sprockets with split taper bushings. RC80. Two (2) 7.5 HP TEFC energy efficient gear motor (460/3/60). Motors are directly coupled to gear reducers. Shaft-mounted reducers. Included for operating flexibility. Drive system is enclosed'in a solid guard with BHS Quick-Release latches and stainless steel hinge lift off door for easy removal and replacement. Grease fittings are plumbed to a common point outside guard for easy and convenient bearing maintenance. Fixed. Included; One per section with electrical interlocks. Automatic oiler system for the drive chain including reservoir, solenoid, distribution manifold, copper plumbing and adjustable brush applicators. One (1) unders and one (1) overs chute included. Screen Width: Discs: IFO: Shafts: Sprockets: Drive Chain: Bearings: Motor(s): Reducer( s ): Frequency Drive(s): Drive Guard(s): Angle: Oiler: Chutes: 84" wide screening surface. BHS patented in-line compound tri-disc design for accurate material sizing. BHS discs #2- 233 shafts 1-2 and BHS disc #2-236 all remaining shafts. Hardened to 400 Brinell for long wear life. 1/2" x 2-1/4" shafts 1-2, and 1-1/4" x 2-1/4" all remaining shafts Nine (9) shafts first deck and nine (9) shafts on the second deck. Hardened double-single timed sprockets with split taper bushings. RC80. Pillow block bearing, 1-15/16" tapped base. Two (2) 7.5 HP TEFC energy efficient gear motor (460/3/60). Motor is direct coupled to gear reducer. Shaft mounted reducer. Included for operating flexibility. Drive system is enclosed in a solid guard with lift off doors for easy access. Grease fittings are plumbed to a common point outside guard for convenient bearing maintenance. Fixed. Automatic oiler system for the drive chain including reservoir, solenoid, distribution manifold, copper plumbing and adjustable brush applicators. One (1) overs and one (1) unders (2-deck) chute included. 2A MRF Sorting Equipment 5 of 46 Bulk Handling Systems (BHS) Page 5