Laserfiche WebLink
6.1. -Page 18 of 145 <br />Attachment A <br />Item <br />Description <br />Qtz <br />17. <br />Unit Powder Painted White <br />1 <br />18. <br />HYBRID READY UNIT: For personnel, single platform machines. Unit will be <br />1 <br />manufactured with all the necessary components including modules and controls to <br />interface to a hybrid system. <br />Unit & Hydraulic Acc. <br />19. <br />Scuff Pad, 24" x 24", With Step (For use with Platform Liner) <br />1 <br />20. <br />Subbase <br />1 <br />21. <br />Hydraulic Reservoir, 30 Gallon, Rectangular <br />1 <br />22. <br />No Reservoir Gauge Required <br />1 <br />23. <br />HVI-22 Hydraulic Oil (Standard). <br />35 <br />24. <br />Standard Pump For PTO <br />1 <br />25. <br />Hot shift PTO for automatic transmission <br />1 <br />26. <br />Standard PTO/Machine Functionality: PTO won't engage until parking brake is <br />1 <br />set. -Once parking (holding) brake is set, PTO and machine functions are enabled. -If <br />parking (holding) brake is disengaged, both PTO and machine functions are disabled. <br />27. <br />Standard PTO/Transmission Functionality for Automatic Transmissions -If chassis is in <br />1 <br />gear, and PTO switch is activated, PTO will not engage. Chassis will remain in gear. <br />Once the chassis is shifted back into gear the PTO will disengage. For some truck <br />configurations the PTO switch must be turned off to allow the transmission to shift into <br />gear. <br />28. <br />Any connection made to the tool circuit be done with Non -Conductive <br />1 <br />hose. If ordering a Hose reel, Manufacturer recommends ordering a hose reel with <br />Non -Conductive hose. The lower tool circuit hoses may be, or become, conductive. <br />Death or serious injury could occur if the unit becomes energized while lower tool circuit <br />is in use. <br />29. <br />Install Tool Circuit with Quick Disconnects, Below Rotation (Male Pressure, Female <br />1 <br />Return) <br />Body <br />30. <br />Body <br />1 <br />31. <br />Steel Body <br />1 <br />32. <br />Body Is To Be Built In Accordance With The Following Standard Specifications: <br />1 <br />A. Basic Body Fabricated From A40 Grade 100% Zinc Alloy Coated Steel. <br />B. All Doors Are Full, Double Paneled, Self -Sealed With Built -In Drainage For <br />Maximum Weather -Tightness. Stainless Steel Hinge Rods Extend Full Length Of <br />Door. <br />C. Heavy -Gauge Welded Steel Frame Construction. <br />D. Integrated Door Header Drip Rail At Top For Maximum Weather Protection. <br />Page 15 of 23 <br />Bidder's Initials <br />189 <br />