Laserfiche WebLink
6.1. - Page 98 of 145 <br />Utility Crane & Equipment <br />8800 West Buckeye Road <br />Tolleson, AZ 85353 <br />(866) 832-4831 <br />Date: 3/2/21 <br />Quote: 210231 <br />To: Public Works Services Department <br />Redwood City, CA <br />Attachment B <br />We are pleased to quote the following VO -260 Rear mount, Insulated 59 ft. 4 in. (18 m) overcenter, <br />articulated aerial platform lift, including the items listed: <br />• Standard platform capacity of 350 lbs. (160 kg). <br />• Platform mounted full pressure individual controls (away from pedestal), including emergency <br />stop and tool selector valve. <br />• TruGuard'm dielectric isolating system single stick control between boom and platform. All <br />control handles are isolated and Tested per ANSI 92.2 2009. The high resistive dielectric system <br />is protected from direct environmental and job related contamination. TruGuardTM technology <br />incorporates the use of full hydraulic controls with durable metal handles and linkages. Handle <br />faces away from pedestal and includes dual tools with Pressure limit. <br />• Platform Support, with mechanical platform tilt <br />• Full pressure turret mounted controls with override. <br />• Engine start/stop from platform and lower controls. <br />• Continuous rotation <br />• Seven gpm (26 Ipm) open center hydraulic system with a 2900 psi (205 kg/cm2) operating <br />pressure. <br />• Fiberglass upper boom tested per ANSI A92.2 for Category C, 46 KV and below, including <br />vacuum flashover protection system. <br />• Chassis insulating system (lower boom insert) providing 18 in. (0.61 m) insulation gap including <br />accommodations to bridge insulation gap for testing per ANSI A92.2. <br />■ White urethane paint over a white gel coat on fiberglass upper boom and lower boom insert. <br />■ Two sets of hydraulic tool outlets at platform, including pressure limit. Quick disconnect fittings <br />are not included. <br />• Two 1/2 in. (12.7 mm) diameter return lines. <br />• Rectangular pedestal with short subframe and A -frame outriggers with pivot feet, two control <br />valves, and a selector valve. Includes control for dump body.\ <br />• Pedestal Assembly 44-5/8 Inch. Rear Mount. <br />• Subframe for chassis up to 138 in. CA. <br />269 <br />