Reso23-23 0111 PC23-23 PC Reso Stanford Block E

Browse Search

4873-4401-5244 v1 to the City’s storm drainage system and shall substantiate their conclusions with drainage calculations to the satisfaction of the City Engineer. The project shall be designed in conformance with the Drainage Guidelines for Residential or Commercial Devel opment (Engineering Division – Drainage Guidelines for Residential Developments (Attachment D-1)). [SDR] [ENGINEERING] 15.Exterior Lighting – Provide a lighting plan for proposed exterior lighting, including cut sheets, a photometric site plan demonstrating light levels and a diagram showing light spillover. This information shall be included in the building permit plans. New light sources must not introduce glare or light effects that spill off the property. [COA][PLANNING] 16.Bicycle Parking – Provide for 21 short-term and 84 long-term bicycle parking and storage spaces and demonstrate compliance on the building permit plans. [COA][ENGINEERING] 17.Electric Vehicle Charging Stations - Provide for and install Electric Vehicle Charging Stations (EVCS Level 2 and 3) equivalent to at least 6% of the total parking spaces (or 50 spaces) for garages over 200 spaces. Provide the appropriate number of accessible EVCS with at least one van accessible, including considerations for signage and time limits. Demonstrate compliance on the building permit plans. [COA][ENGINEERING] 18.Resurface Parking Lot – Slurry-seal and restripe the parking lot within the project scope boundaries (Block E). This work shall be included as part of the building permit plans. [COA][PLANNING] 19.Discards Collection - Prior to the issuance of a building permit, the applicant shall submit to Engineering a Discards Collection Plan for review and approval. The plan shall include the following elements and additional elements as required by City staff: [COA][ENGINEERING] a.Adequate Space: Adequate space for trash, recycling and composting (Discards) storage and servicing areas shall be provided, including areas for wastes banned from regular trash containers such as electronics, fluorescent lamps and batteries. Residential properties shall also provide an area for bulky item collection such as mattresses, furniture, tires and white goods. Space provided for recyclable materials shall equal or exceed the space provided for trash materials and be appropriately-sized. b.Convenience and Accessibility: If the storage area is located outside, then it must be easily accessible by the collection vehicles. If the discards area cannot be located adjacent to the street, then service-day locations easily accessible by the collection vehicle staff must be provided. The recycling area shall be equally accessible as trash and storage areas. c.Screening: All discards areas shall be completely screened and covered from off-site view by a solid fence or masonry wall at least six feet high and compatible with the building architecture. Alternatively, the trash facilities may be placed within the building. d.Implementation and Reporting: Applicant and its successors and assigns shall implement the approved Discards Collection Plan and report its activities and achievements to the Public Works Department annually as requested. Final Map 20.Final Map - Obtain approval and record a Final Map prior to building permit issuance. All final maps shall include the lot configuration and proposed easements and conform to the Subdivision Map Act and Chapter 30 of the Municipal Code. [SDR][ENGINEERING] ATTY/RESO.0111/PC RESO STANFORD BLOCK E - EXHIBIT A & B REV: 11-30-23 VR Page 3 of 20