Laserfiche WebLink
<br /> <br />ATTY/RESO.0025/PC RESO ADOPT AMENDMENTS TO THE ZONING CODE – 2023-2031 HOUSING ELEMENT – EXHIBIT A <br />REV: 06-20-24 VR <br />Page 36 of 158 <br />Table 17A-3 <br />Development Standards - Light Industrial Incubator District <br />Development <br />Standard <br />LII District Additional Regulations <br />Minimum Yards <br />Front 10 feet For every 1 foot the building exceeds 35 feet in height, 1 additional <br />foot of front yard shall be required. Minimum front yards shall be <br />permanently landscaped. <br />Side 0 feet No side yard setback required, except when any lot abuts an R <br />District on either side, it shall have a side yard with a minimum <br />width of fifteen (15) feet on the side abutting such R District. Side <br />yard areas adjacent to streets shall be landscaped, except for <br />driveways and sidewalks. <br />Rear 0 feet No rear yard setback required, except when any lot abuts any R <br />District on either side, it shall have a side yard with a minimum <br />width of fifteen (15) feet on the side abutting such R District. <br />Maximum Floor Area <br />Ratio (FAR) <br />1.0 Eligible projects may request an FAR bonus as described in Article <br />32.4: Floor Area Ratio (FAR) Bonus. <br /> <br />(Ord. No. 1130-359, § 5(Exh. D), 4-8-13) <br />----------------------------------------------------------- <br />Article 18 - IP (INDUSTRIAL PARK) DISTRICT <br /> <br />[Only changes are to 18.2, 18.4 and 18.17] <br />18.2 - Permitted Uses. <br />The following structures and uses are permitted in the IP District: <br />A. Administrative, business, and professional offices, the gross floor area of which is less than ten <br />thousand (10,000) square feet; <br />B. Research and development; <br />C. Manufacture of precision instruments and devices, such as electric or electronic equipment and <br />appliances;