Laserfiche WebLink
REV: 04-29-25 LF <br />LED DOT LIGHTING <br />There shall be eight (8) lights located on the rear of the apparatus. Three (3) of the lights shall be <br />mounted on the rear of the apparatus center location of the tailboard, for use as identification <br />lamps. Two (2) lights and red reflectors shall be located on the lower rear of the apparatus in the <br />outboard locations. Three (3) additional lights shall be located on the rear of the tiller cab above <br />the rear window, centered. <br />Two (2) lights and red reflectors shall also be mounted on the sides facing the side at the rear <br />corners, for use as clearance lamps. <br />The lights shall be TecNiq brand S17 series LED red markers with clear lenses. <br />LED INTERMEDIATE TURN SIGNAL LIGHTING <br />There shall be four (4) amber intermediate turn signal/marker lights and amber reflectors on the <br />sides of the apparatus, two (2) each per side, between the front and rear axles. <br />The lights shall be TecNiq brand S17 series LED amber markers with clear lenses. <br />INTERMEDIATE TURN SIGNALS <br />The intermediate turn signals will flash with the turn indicators. <br />BODY SIDE BACK UP LED LIGHTS <br />There shall be two (2) Tec-Niq model #E61-WS00-1 body side back up lights surface mounted, <br />one (1) each side, in the body wheel well area of the apparatus. Each light shall be installed <br />rearward of the axle, facing rearward and slightly downward to illuminate the ground behind the <br />rear axle. <br />BACK UP LIGHTS ACTIVATION <br />The back up lights shall be activated whenever the truck is placed in reverse and switch in tiller <br />cab. <br />TILLER DRIVING LED LIGHTS <br />There shall be two (2) Tec-Niq model #E61-WS00-1 LED tiller driving lights surface mounted, one <br />(1) each side, in the trailer wheelwell panel in front of the tiller axle to illuminate the ground around <br />and in front of the axle. <br />DRIVING LIGHT ACTIVATION <br />The driving lights shall be activated through the headlight switch or by a separate switch in the <br />tiller cab. <br />REAR DIRECTIONAL LIGHTING <br />The rear directional light bar shall be mounted directly on the rear of the tiller cab, below the <br />window. <br />ATTY/AGR.2025.089/Fire Apparatus Solutions (Purchase of Spartan-LTC 105' TDA) (Page 108 of 150)