Agda Pkt 2025.11.24 Joint SA PFA

Browse Search

Construction-Related Activities 83. Verification for Dimensions -All dimensions, including building location on the site, setbacks, building height, etc. shall be verified by a licensed surveyor. A survey report shall be provided to the Building Inspector for review and approval. [COA][BUILDING] 84 . Sales and Use Taxes -Applicant shall use good faith efforts to register with the Board of Equalization to create an ID prior to project construction and operation. This maximizes the City's allocation of sales and use taxes associated with project construction . Contact Nancy Murguia, Finance Department, at (650) 780-7097 or nmurguia@redwoodcity.org. [COA][FINANCE] 85. Hours of Construction -On-Site Construction activity is permitted between 7:00 a.m. and 8:00 p.m. Monday through Friday, except as permitted on weekends by the Building Official, and shall adhere to the City's Noise Ordinance. If possible, the noisiest construction activities would be scheduled for daytime hours when the ambient noise levels are highest. [SDR][BUILDING] 86. Construction Sign -Prior to the start of any construction work, including demolition, install at least one 36" x 48" (minimum) construction sign in a visible location along the project frontage for the duration of construction. The sign shall include, at minimum, the following information: project name & address, elevation or rendering, construction manager (name, phone number), anticipated completion (season, year), and the City's permitting website http:ljpermits.redwoodcity.org [COA][PLANNING] 87. Construction Meetings-The applicant is required to contact the Permit Counter (650.780.7350) to schedule the following meetings prior to or during construction. [COA][BUILDING] a. Pre-Construction -After City permits are issued, but prior to start of construction, schedule a pre-construction meeting with Engineering, Building, Fire, and Planning staff to discuss the inspection process and requirements for construction and site work. The applicant shall arrange for the attendance of the owner, developer, construction manager, contractor, and all subcontractors who are responsible for grading and erosion and sedimentation protection controls. b. For Affordable units on-site -Interior Finishes & Amenities -After sheetrock inspection but prior to installation, contact the Project Planner and Housing Staff to verify, to the City's satisfaction, that all interior finishes and amenities in the affordable units are equivalent to amenities used in market rate units. 88. Materials Mock-Up -Prior to final foundation inspection, prepare a mock-up for each building that is outdoors, readily accessible, and will remain intact until the project has reached substantial completion. Each mock-up should include all project colors and materials, windows for the base and top, balconies, lighting, and architectural details, as well as construction details, such as the weep screed, to understand how the design addresses them. Then schedule a mock-up meeting with the Planning Division for final review and approval of the project details. Submit an updated colors and materials board or details if any changes are made as a result of the mock-up meeting. [COA][PLANNING] 89. Certification Letters -Prior to final inspection, submit certification letters from the following architects verifying that the project, as constructed, complies with approved plans. After the certification letter has been submitted, the project planner will also confirm substantial compliance ATTY/RESO.0125/PC RESO SOUTH MAIN MIXED USE PROJECT-ENTITLEMENT REV: 11-03-2020 PR Page 35 of 38 RESO. NO. 15908 MUFF NO. 601 8.B. - Page 116 of 120 279