Laserfiche WebLink
<br /> <br />ASPHALT PAVING & SURFACING 02 5500-1 <br />SECTION 02 5000 <br />ASPHALT PAVING AND SURFACING <br /> <br />PART 1 – GENERAL <br />1.01 WORK INCLUDED <br />A. Traffic control as required to divert vehicular and pedestrian traffic around <br />construction. <br />B. Spreading and compacting aggregate sub-base material. <br />C. Spreading and compacting aggregate base material. <br />D. Spreading and compacting asphalt concrete pavement and surfacing. <br />E. Grinding existing pavement for overlaying. <br />F. Replacing asphalt concrete surfacing (Spot Reconstruction). <br />G. Shoulder backing. <br />H. Applying prime coat and tack coat. <br />I. Dust alleviation and control. <br />J. Cleanup and disposal of debris. <br />K. Supplying all labor, materials, equipment and apparatus not specifically <br />mentioned herein or noted on the plans, but which are incidental and necessary <br />to complete the work specified. <br />1.02 APPLICABLE PUBLICATION <br />A. The publications listed below form a part of this specification to the extent <br />referenced. The publication is referred to in the text by the general designation <br />only. <br />B. American Society for Testing and Materials (ASTM) Publication: <br />D - 1557 Standard Test Methods for Laboratory Compaction Characteristics <br />of Soil Using Modified Effort (56,000 ft-lbf/ft3 (2,700 kN-m/m3)) <br />C. California Department of Transportation Testing Manual: <br />Test 304 Method of Preparation of HMA for Testing <br />Test 375 Determining the In-Place Density and Relative Compaction of Hot <br />Mix Asphalt Pavement Using Nuclear Gages <br />7.A. - Page 10 of 121 <br />16