Agmt26 Ensight Technologies, LLC - PARCS System

Browse Search

REV: 01-05-26 LR D. At least 30 days prior to scheduled training sessions, deliver a Training Plan. Include at a minimum, a description of all training courses including identification of instructional outcome, duration of course, and type of presentations. E. Testing Plan and Documentation: Provide a test plan for review and approval by Owner or Owner’s authorized representative 30 days prior to start of first test. Include demonstrations of compliance with specifications, contractual compliance, disaster recovery testing and documentation, definitions of all test objectives, participant responsibilities, documentation for tests, and procedures for dealing with failures during test. F. If the system requires a connection to the public internet via a fixed or cellular connection, provide a cellular site survey of the subject parking facility areas (including the interior of the garages) along with methodology for selection or recommendation of carrier. Contractor is expected to do all required cellular signal strength measurements and determine ideal modem and/or antenna placement. Owner has no responsibility to ensure adequate cellular signal strength. G. Contractor is responsible for all permits and licenses and compliance with all codes and regulations. 1.9 QUALITY ASSURANCE A. All components and installation to comply with all laws, ordinances, codes, rules, and regulations of public authorities having jurisdiction over this part of the work. It is the responsibility of the Contractor to meet these and all other current technical, performance, and safety standards that are applicable to all components and to the entire system, even when not specifically referenced. B. Open-architecture system where all interfaces (hardware and software) conform to national and International Organization for Standardization (ISO) standards. C. All materials and equipment listed, labeled, or certified by a nationally recognized testing laboratory to meet Underwriters Laboratories, Inc. (UL) standards, where test standards have been established. 1. Equipment and materials which are not covered by UL Standards may be considered, provided equipment and material is listed, labeled, certified, or otherwise determined to meet safety requirements of a nationally recognized testing laboratory. 2. Equipment of a class for which no nationally recognized testing laboratory accepts, certifies, lists, labels, or determines to be safe, will be considered if inspected or tested in accordance with national industrial standards, such as NEMA, or ANSI. Evidence of compliance includes certified test reports and definitive product data. ATTY/AGR.2026.001/EnSight Technologies (Parking Access and Revenue Control System (PARCS)) (Page 68 of 167)