Laserfiche WebLink
Page 4 of 5 <br />o Cars, boats, people, animals, drones, crewed aircraft, or other moving <br />objects may not be avoided. <br />In the event that your X10 collides with an object, it will attempt to stabilize and <br />continue flying. <br />Keep your fingers away from the propellers anytime they are spinning such as <br />during launch, flight and landing. <br />Skydio X10 can’t see certain visually challenging obstacles. Do not fly around <br />thin branches, telephone or power lines, ropes, netting, wires, chain link fencing, <br />or other objects less than 0.5 inch (1.3 centimeters) in diameter. This type of <br />crash is not covered under the Skydio Limited Warranty. <br />Do not intentionally try to crash Skydio X10. <br />The chassis of Skydio X10 may become hot to the touch in high-temperature <br />environments or direct sunlight, even when powered off. The metal frame may <br />also become hot if powered on while on the ground for long periods of time. <br />Handle with extreme caution and care. <br />Do not fly over bodies of water if Skydio X10 indicates a GPS quality warning. <br />Exercise extreme caution and care when the sun is low on the horizon as it can <br />temporarily blind the Skydio X10 cameras depending on the angle of flight. Your <br />drone may be cautious or jerky when flying directly toward the sun. <br />Skydio X10 may provide an indication, such as displaying an alert to land, if it <br />encounters an issue or determines the environment is not safe for flying. Fly to <br />the nearest safe area and land immediately. <br />Flying at high altitudes may significantly increase the time required to return and <br />safely land the Skydio X10. The pilot is solely responsible for managing altitude, <br />range and battery level at all times. <br />Be sure to read/watch all flight tutorials and safety-related materials and pay <br />close attention to any in-app messages. <br />Keep your hands on the controller joysticks to maintain control throughout flight. <br />In preparation for landing, stop active autonomous Flight Skills and fly to a clear <br />and stable area. Avoid areas with people, animals and moving objects. Try to <br />avoid areas with lots of fine pebbles, sand, rocks, or similar materials. <br />o The lights on X10 will turn yellow as the drone descends below 10 ft (3 m) <br />indicating that obstacle avoidance is disabled. <br />ATTY/AGR.2026/Amend. No.1/Axon Enterprise, Inc. (Axon Purchase Agreement Amendment) (Page 68 of 69)