Agtm26 Western Truck Fabrication, Inc.

Browse Search

REV: 04-08-26 LF COMPARTMENT #4. WITH REMOVABLE COVER PLATE FOR BATTERY WIRED TO TRUCKS CHARGING SYSTEM WITH AN ISOLATED (ONE-WAY) CIRCUIT WIRE FACTORY UPFITTER SWITCHES TO AUXILIARY BATTERY ALL AUXILIARY LIGHTING SHALL BE WIRED TO AUXILIARY BATTERY THROUGH A FUSE BLOCK LOCATED NEXT TO BATTERY ONE (1) INVERTER WAGAN PROLINE 5000 WATT WITH ISOLATOR INSTALL IN THE PASSENGER SIDE #4 COMPARTMENT ONE (1) LADDER RACK – MOUNTED ON DRIVER SIDE CUSTOM SINGLE SIDE LADDER RACK ON TOP OF THE STORAGE BASKET APPROXIMATELY 9FT LONG 28” HIGH 20” WIDE. INCLUDE A FULL LENGTH 12 GAUGE GALVANNEAL STEEL PUNCHED STORAGE BASKET 8” HIGH X 20” WIDE LOCATED 4” ABOVE THE TOP OF THE COMPARTMENTS. CONSTRUCTED FROM 2” X 1” SQUARE TUBING SUPPORTED BY 2” X 2” X 1/8’’ STEEL ANGLE MOUNTED ON TOP OF THE COMPARTMENTS. UNDERSEALED AND PAINTED WHITE TO MATCH CAB DRAWING SHOULD BE PROVIDED FOR APPROVAL PRIOR TO CONSTRUCTION ONE (1) SHOVEL RACK - DIAMOND PERFORATED INSTALL ON TOP OF THE BODY ON PASSENGER SIDE. NOTE – NO LID FOR SHOVEL RACK. UNDERSEALED AND PAINTED WHITE TO MATCH CAB ONE (1) FRONT BUMPER MOUNTED CONE HOLDER WITH CHAIN LOOP INSTALL ON DRIVER SIDE OF FRONT BUMPER ONE (1) FOLD DOWN PIPE VISE SADDLE INSTALL ON PASSENGER SIDE FRONT OF BODY ONE (1) SLIDING VISE STAND MOUNTED ON PASSENGER SIDE REAR BUMPERETTE 2’’ X 2’’ TUBE RECEIVER MOUNT INTO BUMPER ONE (1) 4’’ MECHANIC VISE ONE (1) SPRING REINFORCEMENT KIT TO BRING TRUCK TO LEVEL ONE (1) VANAIR 160 CFM UNDERDECK PTO DRIVEN AIR COMPRESSOR HEAT EXCHANGER TO BE MOUNTED ABOVE DRIVER SIDE COMPARTMENT # 1 BEFORE PIPE HOLDER, WITH CAGE PROTECTOR AIR IN-TAKE TO BE INSTALLED ABOVE PASSENGER SIDE COMPARTMENT #1 WITH CAGE PROTECTOR ONE (1) REEL CRAFT MODEL 83050 OLP AIR HOSE REEL ATTY/AGR.2026.099/Western Truck Fabrication, Inc. (Vehicle Service-Body Fabrication Services) (Page 19 of 21)