Laserfiche WebLink
<br />2.07 LOCKED ROTOR 'tNA - CODE LETTER <br /> <br />A. Provide motors with locked rotor kV A values less than or equal to those <br />corresponding to Code Letter G. <br /> <br />2.08 THERMAL PROTECTION <br /> <br />A. Provide Integral thermostats or other approved devices to protect the motor from <br />overheating. Thermostats or other devices shall be normally closed and rated <br />125 Vae, 1 amp. <br /> <br />2.09 SPACE HEATERS <br /> <br />A. Provide space heaters for motors. Heaters shall be 120 volts, single phase, as <br />required by the control circuit voltage. <br /> <br />2.10 FACTORY TESTS <br /> <br />A. Conduct factory tests on all motors In conformance with NEMA MG 1-12.51. All <br />tests shall be made in accordance with IEEE Standard 112. <br /> <br />PART 3 - EXECUTION (NOT USED) <br /> <br />END OF SECTION <br /> <br />r- <br /> <br />Electric Motor Drives <br /> <br />Page 4 of4 <br /> <br />Shop Drawing Preparation Package <br />0988015.00 <br />@ Kennedy/Jenks Consultants 2009 <br />