Laserfiche WebLink
• • <br /> Figure 1: Sixteen (16) Cell Grid <br /> 8 - <br /> 6 ' 7 <br /> 5 _ 15 <br /> - -- -- :++-j -- -- - - -- -- <br /> 2 ; 3 <br /> 13 <br /> 1 <br /> 1 <br /> 11 <br /> 1 <br /> 9 <br /> 10 <br /> Note: Cells 12, 14 and 16 are below cells 4, 6 and 8, respectively. <br /> Sample sorting <br /> The sampling crew manager will record the sample identification number, as designated <br /> by the placard, on the tally form (see Appendix 2 for an example of this form). <br /> The sampling crew will move the sample into the designated sampling /sorting area. The <br /> sampling crew and the sampling crew manager will sort the Contamination materials, as <br /> defined in Section 5, out of the load and into designated sort receptacles. The sampling <br /> crew will then weigh the Contamination materials and the sampling crew manager will <br /> record the weights on the tally form. The remainder of the Toad —all acceptable items —will <br /> be put into receptacles, weighed, and recorded by the sampling crew manager on the <br /> tally form. <br /> The sampling crew manager is responsible for monitoring the homogeneity of material in <br /> each receptacle and ensuring the accuracy of the sorting process. For increased <br /> efficiency, the sampling crew manager shall be responsible for either pre - programming <br /> the scale with the receptacle tare weights, or recording the receptacle tare weights for <br /> subtraction later. At the end of each sampling day the sampling crew and sampling crew <br /> manager must comply with any Facility directions regarding cleaning the designated <br /> sampling /sorting area and storing sampling and sorting supplies. <br /> Sample disposal <br /> After the weight of all material in each sample is recorded on the tally sheet, the <br /> sampling crew and the sampling crew manager will move the sample to a location where <br /> it is safe and convenient for the loader operator(s) to remove. <br /> Data management <br /> At the end of each sampling day, the sampling crew manager, Contractor and SBWMA <br /> shall review all forms for accuracy and completeness to ensure timely resolution of any <br /> disputes or issues that may arise. The sampling crew manager will collect the vehicle <br /> selection sheets from the scale house staff and ensure that net weights have been <br /> recorded for each selected load. <br /> Franchise Agreement for Collection Services with Recology San Mateo County Attachment E -2 <br /> Redwood City Page 7 of 19 <br />