Laserfiche WebLink
• Control the amount of runoff crossing the site (especially <br />during excavation) by using berms or temporary or <br />permanent drainage ditches to divert water flow around the <br />site. Reduce storm water runoff velocities by constructing <br />temporary check dams or berms where appropriate. <br />• Keep materials out of the rain -- prevent runoff contamination <br />at the source. Cover exposed piles of soil or construction <br />materials with plastic sheeting or temporary roofs <br />• Water or cover exposed soils twice daily to minimize wind <br />erosion. <br />Finding: The mitigation measure identified above is feasible and <br />would reduce the potentially significant environmental impact described above to <br />a less- than - significant level. <br />The mitigation measure identified above would reduce the <br />potentially significant environmental impact described above to a less -than- <br />significant level by implementing best management practices to reduce potential <br />soil erosion by minimizing the amount of soil exposed to wind and stormwater <br />runoff. <br />B. Stormwater Quality <br />Potential Impact: The proposed project would contain typical <br />urban activities (such as landscaping, vehicle parking, and maintenance <br />activities) that could affect the stormwater quality. (Potentially Significant) <br />Mitigation: The following mitigation measures, as set forth in the <br />Initial Study and the FEIR, are hereby adopted and will be implemented as <br />provided in the Mitigation Monitoring Program: <br />Implement BMPs and NPDES Measures During Operation. The <br />project sponsor shall implement, but not be limited to, the following BMPs or <br />specific measures in the NPDES permit, whichever is more comprehensive, that <br />would reduce the potential degradation of water quality in San Francisco Bay to a <br />less- than - significant level: <br />• Install oil and grease separators or fossil fuel filters in the <br />drains to filter out automotive pollutants. <br />• Cover areas where potential pollutants such as trash, <br />grease, chemicals, paints, and hazardous and biological <br />wastes are stored or collected. <br />• Seal leaking dumpsters or storage areas immediately. <br />