Laserfiche WebLink
6.1. E. - Page 7 <br /> CITY OF REDWOOD CITY <br /> Truck Mounted Continuous Rodder <br /> Technical Specifications <br /> 12-08-11 <br /> Tool boxes: <br /> Two (2) toolboxes will be provided and located in the skirt area of the platform, one on each <br /> side ahead of the rear wheels. These toolboxes shall be as large as space permits. A shelf <br /> with front lip shall be installed midway in each toolbox. All compartments shall contain <br /> "Dri-Deck" on the floor and shelves and the toolboxes shall have drain holes. All <br /> compartments shall have paddle type latches all keyed alike. All compartments shall have <br /> automotive bulb style weather-strip. The weather strip must not impede closure of the <br /> toolbox. <br /> One (1) tool box between cab and rodder built exactly the same as Sacramento <br /> County, doors open on both sides, expanded metal on top, slanted tool handled <br /> Storage on sides. Keyed alike with above toolboxes. All compartments shall have <br /> automotive bulb style weather-strip. The weather strip must not impede closure of the <br /> toolbox. <br /> Warnin� li�hts and work li�hts: <br /> (2) Directional arrow bars Model Code 3 NASL839H LED X Amber Stick with factory <br /> controls, shall be provided on the front and rear rodder cowling. (2) LED Strobes Model <br /> L31HAF — LED shall be provided. <br /> The rodder shall include an adjustable floodlight mounted on top of the working end of the <br /> rodder to illuminate the rear working area with a switch mounted on the control panel. <br /> All safety / warning lights shall be controlled form inside the chassis <br /> Equipment: <br /> A rod guide hose support with 2" male Cam-loc fitting shall be mounted at the operating end <br /> of the rodder. It shall be hanging by an adjustable chain. <br /> A rod oiler, wiper clamp and one bag of extra pads shall be supplied with the rodder. <br /> Provide and install a rod bending block on the rear of the rodder <br /> Move to curb side <br /> A swivel padded seat with arm rests shall be provided at the operator station. A umbrella <br /> Over seat shall be provided. Colored Orange, Black and Red, Not Green, White and <br /> Yellow <br /> A backup alarm rated at 95 decibels shall be installed. <br /> Two (2) cone holders will be provided, one (1) on the front bumper, one (1) on the rear <br /> drivers side of the rodder. <br /> 4 <br />