Laserfiche WebLink
2. Custom Location Message(s) —Typically message states street being crossed and cross <br /> street names, and other vital information to help pedestrian with location and direction. <br /> 3. Custom Walk Message(s) —Typically alerts pedestrians that the walk interval has begun <br /> and name of street being crossed. <br /> 4. Custom Clearance Sounds/Countdown — Plays a sound to let pedestrians know they <br /> should clear intersection crosswalk. This option tone typically would sound similar to the <br /> locate tone but is played at a faster rate or counts down the number of seconds in the <br /> clearance phase. <br /> 2.19 PEDESTRIAN SIGNALS <br /> A. Pedestrian signals shail be the Light Emitting Diode (LED) type pedestrian signal, conforming to <br /> the provisions of Standard Special Provision 86-405 "Light Emitting Diode Pedestrian Signal <br /> Modules" and Section 4E of the California Manual on Uniform Traffic Control Devices. <br /> B. Pedestrian signals shall be the "Countdown" type pedestrian signals conforming to the <br /> provisions in Section 4E.07, "Countdown Pedestrian Signals" of the California Manual on <br /> Uniform Traffic Control Devices, latest edition. <br /> C. Pedestrian Signal Faces shall be a single section with the "Upraised Hand" and "Walking <br /> Person" overlain on the left of the pedestrian signal face, and the "Countdown" on the right of <br /> the pedestrian signal face. <br /> 2.20 BATTERY BACK-UP SYSTEM FOR TRAFFIC SIGNALS <br /> A. Battery Back-up Systems for Traffic Signals shall be in conformance with "Specification for <br /> Battery Back-up System For Traffic Signals Utilizing Light Emitting Diodes (LED) Traffic Signal <br /> Modules" by the Department of Transportation dated July 2004, as amended below: <br /> 1. References to "State," "Department," or similar references meant to refer to the <br /> Department of Transportation shall be amended to refer to the City or the City <br /> Engineer as appropriate. <br /> 2. References to Caltrans Model 332A Cabinets, Model 170E Controllers, and <br /> Model 2070 Controllers shall be amended to refer to Caltrans Type P Cabinets <br /> and NEMA Type 90 Controllers as appropriate. <br /> 3. The following sections, paragraphs and figures are deleted in their entirety: <br /> a. Paragraph 2.1.1 & 2.1.2; <br /> b. Paragraph 2.1.5 & 2.1.6; <br /> c. Section 2.2; <br /> d. Paragraph 2.3.5 through paragraph 2.3.7; <br /> e. Paragraph 2.3.14 through paragraph 2.3.16; <br /> f. Section 5.6; <br /> g. Figure 2. <br /> 4. The following sections and paragraphs are amended as follows: <br /> a. Paragraph 2.1.7—delete option (1) Internal Mounted Option; <br /> b. Paragraph 2.3.3 line 3 shall read — "The specific finish of the external <br /> cabinet shall be in conformance with Section 2.02 "Paintina" of these <br /> Specifications. A qraffiti coatina acceptable to the City shall then be <br /> a lied. " <br /> 5. The following paragraph is added to Section 5: <br /> a. Paragraph 5.0: The Contractor shall provide a Certificate of Compliance to <br /> the Citv Enqineer certifvinq that the batterv back-up svstem meets or <br /> exceeds these sqecifications. <br /> SIGNALS, LIGHTING,AND ELECTRICAL SYSTEMS <br /> EAST BAYSHRORE ROAD STREET LIGHTING PROJECT 16500-10 <br />