My WebLink
|
Help
|
About
|
Sign Out
Browse
Search
AgdaPkt 2013-12-09 Special
RedwoodCity
>
City Clerk
>
Agenda Packets
>
2010-2019
>
2013
>
AgdaPkt 2013-12-09 Special
Metadata
Thumbnails
Annotations
Entry Properties
Last modified
12/5/2013 5:11:54 PM
Creation date
12/5/2013 5:05:07 PM
Metadata
Fields
Template:
CC Index
CC Index - Document Type
Agenda Packet
Meeting Type
Special
Agency Type
City Council
Date
12/9/2013
Jump to thumbnail
< previous set
next set >
There are no annotations on this page.
Document management portal powered by Laserfiche WebLink 9 © 1998-2015
Laserfiche.
All rights reserved.
/
212
PDF
Print
Pages to print
Enter page numbers and/or page ranges separated by commas. For example, 1,3,5-12.
After downloading, print the document using a PDF reader (e.g. Adobe Reader).
Show annotations
View images
View plain text
4.4.B. - Page 18 <br /> the locations described in Sections 903.2.1 through 903.2.12 of the Building <br /> Code, whichever is more restrictive. <br /> Sec. 9.58. SECTION 2603.4.1.5 OF THE BUILDING CODE AMENDED: Section <br /> 2603.4.1.5 of the Building Code is hereby amended to delete the reference to Class C <br /> roof-covering assembly and to read as follows: <br /> Section 2603.4.1.5 Roofing. Foam plastic insulation under a roof assembly or <br /> roof covering that is installed in accordance with the code and the manufacturer's <br /> instructions shall be separated from the interior of the building by wood structural <br /> panel sheathing not less than 0.47 inch (11.9 mm) in thickness bonded with <br /> exterior glue, with edges supported by blocking, tongue-and-groove joints or <br /> other approved type of edge support, or an equivalent material. A thermal barrier <br /> is not required for foam plastic insulation that is a part of a Class A or B roof- <br /> covering assembly, provided the assembly with the foam plastic insulation <br /> satisfactorily passes FM 4450 or UL 1256. <br /> Sec. 9.59. SECTION J102.1, APPENDIX J OF THE BUILDING CODE AMENDED: <br /> Section J102.1, Appendix J of the Building Code is hereby amended to add the <br /> definition of Engineered Grading: <br /> Section J102.1. Definitions. For the purpose of this appendix chapter, the terms, <br /> phrases and words listed in this section and their derivatives shall have the <br /> indicated meanings. <br /> BENCH. A relatively level step excavated into earth material on which fill is to be <br /> placed. <br /> COMPACTION. The densification of a fill by mechanical means. <br /> CUT. See excavation <br /> DOWN DRAIN. A device for collecting water from a swale or ditch located on or <br /> above a slope, and safely delivering it to an approved drainage facility. <br /> ENGINEERED GRADING. An excavation greater than two (2) feet in depth; <br /> where cut slope is greater than five (5) feet in height; where fill is to be placed on <br /> natural grade steeper than 20% (1:5 ratio); where fill is greater than three (3) <br /> feet in height; where fill supports a structure; or which consist of more than 50 <br /> cubic yards. <br /> EROSION. The wearing away of the ground surface as a result of the movement <br /> of wind, water or ice. <br /> EXCAVATION. The removal of earth material by artificial means also referred to <br /> as a cut. <br /> ATTY/ORD.398/BUILDING CODE ADOPTION <br /> REV: 11-20-13 JS <br /> Page 5 of 10 <br />
The URL can be used to link to this page
Your browser does not support the video tag.