Laserfiche WebLink
7.1.E. - Page 13 <br /> Consultant shall develop complete (90%) design plans and specifications for the project <br /> for Redwood City final review. Detailed design shall conform to all applicable water <br /> industry codes and Redwood City design standards; and shall be stand-alone bid <br /> documents. As delivered, the 90% documents shall be ready for advertisement and <br /> competition, to the extent practical, subject to any changes the Redwood City may <br /> identify or limited open issues. <br /> Consultant shall prepare an updated draft Engineer's Cost Estimate for construction <br /> activities. <br /> Consultant shall perform an internal QA audit of the designs. <br /> Consultant shall assist Redwood City in responding to the 90% Design Review <br /> Submittal comments from Redwood City Operations, Maintenance, and Engineering <br /> staff. <br /> Deliverables. <br /> • One set (11" x 17") of drawings and specifications (electronic) shall be <br /> provided to Redwood City for review at the 90% level of completion. <br /> Consultant shall have performed its internal quality control prior to this <br /> submittal. Stamped "not for construction". <br /> • Electronic files on CD diskette (or delivered by email) to Redwood City. <br /> • Preliminary Engineer's Estimate. Estimate shall include a breakdown of <br /> labor, material quantities, and unit prices. The estimate shall list all <br /> assumptions including overhead and profit, subcontract mark-ups, tax <br /> and contingency. Support documents shall be submitted with the cost <br /> estimate. <br /> • One set of 90% Calculations. <br /> 100% Design <br /> Redwood City will perform a detailed design review of the 90% submittal. Consultant will <br /> meet with Redwood City staff to review comments on the 90% review. <br /> Consultant shall make all necessary revisions and modifications to the 90% Design as <br /> agreed upon between Redwood City and Consultant. These revisions and modifications <br /> will be incorporated into the 100% Finalized Plans, Calculations and Specifications. All <br /> comments shall be either incorporated, or responded to if not incorporated. Consultant <br /> shall finalize all construction documents for bidding (i.e., plans and specifications) and <br /> shall finalize the Engineer's Cost Estimate. <br /> ATTY/AGR/2014/AMENDMENTS/AMEND NO.1 G&E ENGINEERING <br /> REV;03-21-14 VR <br /> Page 9 of 13 <br />