Laserfiche WebLink
i . �a.��..��: ,�.m��..�.�.v.��...� ..a����M <br /> 3. Reference by manufacturers, brands or models is to establish type and <br /> quality of materials desired. Substitutions of materials of equal quality will <br /> be permitted upon the priorwritten approval. <br /> 1.03 JOB CONDITIONS <br /> A. No striping or marking shall be applied until pavement surfaces have been <br /> approved. <br /> B. Concrete shall be thoroughly cured before application of striping or marking <br /> thereon. <br /> PART 2 - PRODUCTS <br /> 2.01 TEMPORARY PAVEMENT MARKERS <br /> A. Short term, temporary pavement markers shall be day/night retroreflective raised <br /> pavement markers as manufactured by Davidson Plastics company or approved <br /> equal conforming to the requirements of Section 85 of the State Standard <br /> Specifications and the California MUTCD. <br /> 2.p2 ru�o�enoi weT�r STRIPES AND MARKING <br /> A. �e�e�las�is stripes and markings shall conforming to <br /> Section 84 of the State Standard Specifications <br /> , • <br /> B. �qe��eplas#+s stripes and markings shall have a minimum skid friction value of <br /> BPN = 35. <br /> C. Submit Caltrans inspection tags with each load of material delivered to the job <br /> site. <br /> 2.03 PERMANENT PAVEMENT MARKERS AND ADHESIVES <br /> A. Pavement markers shall be the type and description shown, noted or called for <br /> on the plans and detail drawings and shall conform to the requirements of <br /> Section 85 of the State Standard Specifications and the California MUTCD. <br /> B. Adhesive for pavement markers shall be either rapid set epoxy or hot melt <br /> bituminous adhesive conforming to the requirements of Section 85 of the State <br /> Standard Specifications. <br /> C. Submit Caltrans inspection tags with each load of pavement markers delivered to <br /> the job site. <br /> 2.04 REFLECTORIZED MARKERS AND POSTS <br /> A. Retroeflective metal markers shall be of the size, type and description shown, <br /> noted or called for on the plans and detail drawings and shall conform to the <br /> requirements of Section 82 of the State Standard Specifications. <br /> ROADWAY MARKING ACCESSORIES 02840-2 <br /> BREWSTER AVENUE BICYCLE IMPROVEMENTS-SIGNING AND STRIPING PROJECT <br />