Laserfiche WebLink
ATTY/AGR.2014.088/RWC 1856_755 Brewster(STMMA) <br /> Manufactured Stormwater Treatment Measure �l <br /> Inspection and Maintenance Checklist <br /> r <br /> Property Owner: Property Address: <br /> v <br /> Date of Inspection: Type of Inspection: ❑ Monthly ❑ Pre-Wet Season co <br /> 0 After heavy runoff ❑ End of Wet Season <br /> System Type: W <br /> Installer/Contractor: <br /> Manufacturer: Inspector(s): <br /> Defect Conditions When Maintenance Is Maintenance Comments(Describe maintenance completed and if Results Expected When <br /> Needed Needed?MN) done) <br /> maintenance was not conducted,note when it will be Maintenance Is Performed <br /> done) <br /> I.Sediment,trash Sediment,trash and debris Sediment,trash and debris <br /> and debris accumulated in the sedimentation removed from sedimentation <br /> accumulation on basin,riser pipe,retention pipes and basin,riser pipe and filter <br /> Filter filter bed. Filter does not drain as bed and disposed of <br /> specified. properly. Filter drains per <br /> design specifications.Empty <br /> cartridge should be <br /> reassembled and reinstalled. <br /> 2.Standing water Manufactured treatment measure Clogs removed from filters, <br /> does not drain within five days after sedimentation basin,riser <br /> rainfall. pipe and filter bed. Filter <br /> drains per design <br /> specifications. <br /> 3.Mosquitoes Evidence of mosquito larvae in Clogs removed from <br /> manufactured treatment measure. sedimentation basin,riser <br /> pipe and filter bed. Filter <br /> drains per design <br /> specifications. <br /> 4. Miscellaneous Any condition not covered above that Meet the design <br /> needs attention in order for the specifications. <br /> manufactured treatment measure to <br /> function as designed. <br /> Page 12 014 <br />