Laserfiche WebLink
<br />Page 17 of 41 <br />ATTY/ORD.411/ZONING ORDINANCE AMENDMENTS <br />REV: 07-20-15 VR <br />EXHIBIT F <br /> <br />Revisions to Article 9: R-4 (Multi-Family – Medium <br />Density) District <br /> <br />ARTICLE 9 R-4 (Multi-Family – Medium Density) District <br /> <br />Sections: <br />9.1 Purpose. <br />9.2 Permitted Uses. <br />9.3 Accessory Uses. <br />9.4 Conditional Uses. <br />9.5 Height Regulations. <br />9.6 Lot Area. <br />9.7 Lot Width. <br />9.8 Lot Coverage. <br />9.9 YardSetback and Open Space Requirements. <br />9.11 Other Required Conditions. <br />9.12 Minimum Pervious Area and Stormwater Requirements. <br />9.13 Required Pervious Area in Front Yard. <br /> <br />[All sections not listed below remain unchanged.] <br /> <br />9.5 Height Regulations. <br />The maximum building height for all structures is 45 feet, except single-family homes <br />and duplexes which have a maximum building height of 28 feet. No structure shall <br />exceed forty-five (45) feet in height, and no accessory building shall exceed fourteen <br />(14) feet in height, whichever is greater. <br /> <br />9.7 Lot Width. <br />The minimum average lot width shall be fifty (50) feet for a single-family dwelling and <br />for a two (2)-family (duplex) dwelling, and seventy-five (75) feet for a multiple dwelling. <br />Every lot shall have a minimum of thirty-five (35) feet of frontage on a public street for a <br />single-family dwelling, and a minimum of fifty (50) feet of frontage on a public street for <br />a two (2)-family (duplex) dwelling, multiple dwelling, or building group. The required <br />frontage may be located on a street or private street (privately-owned and maintained <br />but publicly accessible). <br /> <br />9.9 Yard Setback and Open Space Requirements. <br />A. The following yard setbacks are required in the R-4 District: Definitions and <br />Modifications. For further information on how to measure a setback and modifications <br />to setback requirements, see Section 32.3 (Supplemental Setback Requirements). <br />6.5.A. - Page 19