Laserfiche WebLink
6.1.1. - Page 16 <br /> connection over which the gathered parking occupancy data can be sent via an API, and also for <br /> remote management of the nBoxes. <br /> The nBoxes will be mounted on garage walls in unobtrusive locations and connected to the <br /> vehicle-sensing cameras by CAT5 cable in low-voltage conduit. All nBoxes will be powered by <br /> connection to a 277VAC circuit wired via an appropriate conduit. The vehicle-sensing <br /> cameras will be ceiling-mounted in appropriate locations over entrance/exit gates and (in <br /> the Jefferson Garage only) over the P1/P2 up-down ramp. <br /> For the dynamic parking occupancy signs to be located in or near both garages, VIMOC will <br /> provide the use of an industry-proven Salutaire 2'x4', high-intensity, full-color LED signs <br /> interfaced to the VIMOC cloud-based API. The dynamic signs will poll the nBox API for real- <br /> time parking occupancy status and display the number of open spaces, or display a "FULL" <br /> message if no parking spaces are available. Additionally, the sign adjacent to the gates of the <br /> Jefferson Garage will show similar messages specific to the P1 and P2 levels of that garage. <br /> The Jefferson Garage exterior sign will be 2-sided and mounted on the side of the building <br /> directly above the PARKING arrow sign, and will draw power from that sign. The Jefferson <br /> Garage interior sign will be 1-sided and either ceiling-hung or mounted on the pillar adjacent <br /> to the entrance gates. The mounting location of the Broadway Garage sign on the Broadway <br /> side will be determined at the City's discretion. The mounting location of the Broadway <br /> Garage sign on the Marshall St. side can be either on the side of the garage above the <br /> entrance or on a streetlight pole directly across the street. We have currently quoted one 2- <br /> sided sign and one 1-sided sign for the Broadway garage. <br /> The signs offer very high-quality LED images, in full-color, with a wide viewing angle of 140 <br /> degrees horizontally and vertically. The signs are dimmable from 100% to 0% brightness <br /> manually or automatically. The signs use newer SMD technology, allowing smaller pixel pitches <br /> to be incorporated on the biggest displays outdoors. The signs will meet the specifications set <br /> forth in Attachment 2 below, which is incorporated herein by reference. <br /> The signs will offer a programmable API for changing messages, to which VIMOC will <br /> provide an open API allowing the City to create your own custom messages, or for VIMOC to <br /> make such changes at the City's request. <br /> The signs will offer several modes of communication with the VIMOC nBoxes — hard-wired <br /> CAT5, WiFi, or 4G cellular. VIMOC will install whichever communication mode is most reliable <br /> and practical given each sign's location and distance from the associated controlling nBox. <br /> Redwood City shall determine within thirty (30) days of contract execution the mounting <br /> locations of the four signs and whether any pole replacement is needed and if so, when such <br /> change shall be completed. VIMOC shall not be responsible for delays related to installation of <br /> a new light pole or any structural issues or failures if the light pole is not replaced. <br /> ATTY/AG R/2016.082/VI MOC TECH NOLOG I ES INC. <br /> REV:04-21-16 JS <br /> Page 13 of 21 <br />