Agmt16 Sandis, Civil Engineers, Surveyors, Planners

Browse Search

k. Trees within the planting strip and fences. 2. The Consultant shall prepare topographic base map and shall be completed in AUTOCAD 2004 version or current City's AUTOCAD version at a scale of 1 "=20'. Text information and other entities shall be readable at this scale when plotted on a plan and profile sheet. Final plotted text height shall be 0. 1 ". 3. The Consultant shall use the City's standard legend for drafting annotations. 4. The Consultant shall survey all grades and improvements for houses on the downhill side of the project area. These shall be up to and including the houses, and any driveways that extend past the house a minimum of 75' from the property line, and potentially further for steeper driveway approaches for the determination of conform locations. 5. The Consultant shall set the center line of street at every 50 feet on tangent and 25 feet stations on curves. Survey station shall be at the center of the street at 50 feet intervals 50 feet intervals, 25 feet intervals on curves, beginning at centerline of street intersections or manholes (see attached location map, if applicable). Indicate the following items: spot elevations at each 50 foot station , center line, lip of gutter or edge of pavement, face of curb at flow line, back of curb, sidewalk, planting strip or landscape area and right-of-way line or property line. 6. The Consultant shall extend the base map topographic survey to 25 feet beyond centerline of end manholes and/or shall extend 50 feet beyond street intersections in all possible directions unless otherwise noted (see attached location map, if applicable). 7. The Consultant shall coordinate with the City for location of survey station 1 +00. Survey stationing 1 +00 shall start at centerline of street intersection or centerline of manholes unless otherwise noted. Please see attached location map with notations of recommended starting point of station, if applicable. 8. The Consultant shall use the Redwood City Datum in preparing the topographic survey. The City will provide the location of the nearest benchmark if required. Benchmark information used shall be noted on the topographic survey. North American Vertical Datum of 1988 (NAVD88) shall be used . 9. The Consultant shall request the As-Built/Record Drawings from utility companies (e.g. Comcast, PG&E, AT&T, Pacific Bell, SBSA, MCI , SFPUC, Calwater, RCN, SVCW , etc. ) and include all pertinent information into the base map. The City will assist the Consultant in obtaining the As-Built/Record Drawings, if utility companies are being non-responsive or difficult. 10. The Consultant shall survey all grades and improvements for houses on the downhill side of the project area . These shall be up to and including the houses, and any REV: 07-05-16 VR Page 10 of 12 ATTY/AGR.2016.174/SANDIS, Civil Engineers, Surveyors, Planners - Alameda Project