Laserfiche WebLink
Page 6 of 27 <br /> <br />Table 2: Architectural Advisory Committee Recommendations <br />Page Guideline Section Deviation AAC Recommendation <br /> <br /> <br /> <br /> <br /> <br /> <br />107 <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />107 <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />119 <br />width ratio) should be used. <br />Openings may be composed <br />of a series of vertically <br />proportioned panes or <br />frames. <br /> <br />2.8.6.E.2.b <br />(Window Proportions – <br />Building Top) <br />A vertical proportion of <br />window panes or window <br />openings (3:2 to 2:1 height: <br />width ratio) should be used. <br />Openings may be composed <br />of a series of vertically <br />proportioned panes or <br />frames. <br /> <br />2.8.6.E.2.d <br />(Window Inset – Building <br />Top) <br />Window frames should not be <br />flush with walls. Exact <br />minimum inset will vary by <br />Architectural Character Type. <br /> <br />2.9.3.F.2.h <br />(Windows – Contemporary <br />Architectural Character) <br />Building Middle and Top <br />windows should be clear and <br />should not be tinted, should <br />be inset a minimum of 3- <br />inches from the adjacent wall <br />plane, should be of the <br />double or single-hung or <br />casement type. <br />106 2.8.6.A.2.b <br />(Top Cap Height) <br />The Building Top Cap should <br />be no less than 4 feet in <br />height. <br />The Building Top Cap is <br />less than 4-feet in height; 3- <br />feet, 3-inches to 4-feet is <br />proposed, depending upon <br />material availability. <br />Approve. <br />113 2.9.2.F.2.e <br />(Changes in Color) <br />Vertical changes in color <br />should take place on inside <br />corners (not outside corners). <br />See the Inside and Outside <br />Corners illustration in Section <br />2.9.2(B) for further <br />clarification. Horizontal <br />Not all changes in color <br />take place at inside corners <br />and/or at cornices, belt <br />courses, or other such <br />horizontal ornament. <br />Approve. <br />8.A. - Page 6