Laserfiche WebLink
Page 5 of 27 <br /> <br />Table 2: Architectural Advisory Committee Recommendations <br />Page Guideline Section Deviation AAC Recommendation <br />pilaster or pier should <br />be at least 18 inches <br />wide, but should not <br />exceed 4 feet in <br />width. <br />· The depth of the <br />protruding pilaster <br />should be at least 12 <br />inches. <br />· A Plinth treatment, as <br />described above. <br />· A cap treatment, <br />such as a darker <br />color, a visible <br />thickening, a crown <br />mold, or a column <br />capital. <br />104 2.8.5.A.2.b <br />(Middle Cap Height) <br />The Building Middle Cap <br />should be no less than 3-feet <br />in height. <br />The Building Middle Cap is <br />less than 3-feet in height; 2- <br />feet is proposed. <br />Approve. <br />105 <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />105 <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />2.8.5.C.2.c <br />(Bay Windows) <br />Tops of bay windows should <br />be accentuated by a <br />compound cornice, a <br />decorative roof, or some <br />other attractive architectural <br />element. <br /> <br />2.8.5.C.2.d <br />(Bay Windows) <br />The bottom of bay windows <br />should be accentuated by <br />brackets, corbels, or a similar <br />architectural element which <br />appears to structurally <br />support the bay. <br />The tops of the bay windows <br />consist of a single, flat <br />cornice line. <br /> <br /> <br /> <br /> <br /> <br /> <br />The bottoms of the bay <br />windows are cantilevered <br />with no visible structural <br />support. <br />Approve. <br />105 <br /> <br /> <br /> <br /> <br /> <br /> <br /> <br />105 <br /> <br /> <br /> <br /> <br /> <br />2.8.5.E.2.a <br />(Window Inset – Building <br />Middle) <br />Window frames should not be <br />flush with walls. Exact <br />minimum inset will vary by <br />Architectural Character Type. <br /> <br />2.8.5.E.2.b <br />(Window Proportions – <br />Building Middle) <br />A vertical proportion of <br />window panes or window <br />openings (3:2 to 2:1 height: <br />The proposed Architectural <br />Character Type is <br />Contemporary, for which <br />the guideline minimum <br />window inset is 3-inches. <br />As proposed the windows <br />would be inset 2-inches. <br /> <br />The project proposes <br />varying window proportions <br />in the Building Middle and <br />Top. <br />Approve. <br /> <br />8.A. - Page 5