Laserfiche WebLink
EXHIBIT A <br />Scope of Work/ Tasks <br />Contractor will furnish all labor, materials, tools, equipment and incidentals to perform concrete <br />sidewalk offset cutting. This work includes: <br />1. Mobilization and demobilization at project sites; <br />2. Surveying project sites; <br />3. Traffic control (as needed); <br />4. Concrete cutting of sidewalk offsets measuring over 3/4" and below 2"; <br />5. Reporting locations of all sidewalk offsets needing removal and replacement to the City, <br />6. Reporting details of all sidewalk offsets addressed, including location, address, date, <br />description, height of offset, length of offset, and calculated cost; <br />7. Site clean-up. <br />Invoicine <br />Contractor will submit monthly invoices to: Public Works Services Department, Attn: Public <br />Works Superintendent - ROW, 1400 Broadway Street, Redwood City, CA 94063. <br />California State Contractor's License <br />Contractor shall maintain for the duration of the Agreement and any and all amendments, an <br />active contractor's license from the California Contractor's State License Board related to <br />concrete services. <br />2. Payment Terms <br />The total not to exceed contract amount is $50,000. Fees will be billed based on the actual per <br />inch foot of sidewalk offset removed at each work site at the rate of $18.00 per inch foot of <br />sidewalk offset. <br />Method of Measurement and Payment <br />Inch -feet shall be calculated by multiplying the average depth of the cut on each sidewalk offset <br />by the length along the joint that is cut. <br />Example: If a joint is cut 1" on one side and tapered to 0" on the other side of a full 4 -foot width <br />of the sidewalk, it shall be calculated as follows: <br />1" + 0" x 4' = Total inch -feet <br />2 <br />Average x width = Total inch -feet <br />Inch -feet x cost per inch foot = Total price for sidewalk offset <br />REV: 06-23-17 MI <br />Page 6 of 7 <br />ATTY/AGR.2017.147/Trip Stop Sidewalk Repair Inc - Sidewalk Offset Cutting <br />