Reso PC17-18 0107 PC Reso Approving Downtown Plan Community Permit - 707 Bradford

Browse Search

39. Water Meters — The project is limited to one "master" water meter for domestic water service. Any metering for individual units must be accomplished by private sub -meters within the property. [COA][ENGINEERING] 40. Recycled Water Facilities — Recycled water (purple pipe) facilities shall be provided and designed in accordance with Engineering Standards for dual plumbing, irrigation, and other warranted uses per the Recycled Water Ordinance, Chapter 38. Services that are to be supplied by recycled water (either at the time of project completion or at a future date) shall be designed to properly function at the design pressure required by Engineering. Upon a final determination by the City that recycled water is available for the property, the applicant shall connect the project to the recycled water system. [SDR][ENGINEERING] 41. Recycled Water Report - The applicant shall hire an engineer licensed in California and experienced in the field of wastewater treatment to prepare a recycled water report for dual plumbed facilities, pursuant to California Water Code section 13522.5 and in accordance with California Code of Regulations sections 60314 and 60323 (found within Title 22, Division 4, Chapter 3). The report shall be submitted prior to project closeout, and will be routed to the Public Works Department for review and coordination. It is recommended a draft of the report is prepared prior to commencing any plumbing work to prevent the need for unplanned changes. [COA] [ENGINEERING] 42. Cross -Connection Control Test - Prior to issuance of the certificate of occupancy, all applicable plumbing systems must pass a cross -connection control test, performed by a Cross -Connection Control Specialist Certified through the CA -NV Section of the AWWA and observed by Public Works staff. The cross -connection control test method must be included in the Recycled Water Report. The applicant is responsible for all fees associated with the performance of the cross -connection control test. [COA] [ENGINEERING] 43. Backflow Protection — Backflow protection on all water services is required. The backflow preventer shall be above grade and located on private property, accessible to the Public Works division for testing. [COA][ENGINEERING] 44. Fire Flow - The Project shall meet fire flow requirements as established by the Fire Department which are based on the Fire Code. Fire flow tests are typically performed during the preliminary design phase but must be completed prior to submittal of final design. Applicant shall contact the Fire Department forfire flow requirements, and then submit a written fire flow test request to Engineering. [COA][ENGINEERING] 45. C3 Requirements - Plans shall be designed to meet C3 requirements of the Municipal Regional Permit (MRP) NPDES Permit CAS612008 and be in ATN/RESO.0107/PC RESO APPROVING DOWNTOWN PLAN COMMUNITY PERMIT -707 BRADFORD REV: 12-01-17 PR Page 14 of 23