Agmt99 Lucent Technologies - Laserfiche WebLink

Browse Search

Exhibit B � 4. Set the radius to 1 (mile). 5. Hit Execute. Expected Resutts The map should zoom in. Test Procedure 1. Exercise some of the mapping apptication controls like zoom in,zoom out, pan and so forth. Expected Results The map should respond quidcly to aU actions. 7.1 Integrated CAD Functionality Note that before performing the foHowing testing, CAD Street Name aliases must be configt�red to- match the street abbreviations used on the map. Ifi multiple aties are involved,the city narries-must match as well. Test Procedure 1. Locate a valid street address on the map. This may be done by double clicking on a landmark (if so populated) or by double clicking on a street range and determining a valid number address wi#hin the given range. 2. Hit the new call button on the main CAD screen and enter the address(from the map)as well as a valid cornplaint type. 3. Save the call and the symbal should appgar on the map. 4. Assign a unit to the call and make sure the unit appears on the map. 5. Locate a second valid street address and add a second call for that address. 6. Ctear both calls and verify that both calls and any assig�ed units are removed from the map. Expected Results The map should zoom in and center on the new location. From the all calts window, highfight the first call and hit the Map button. The map should zoom in and center on the first call. 7.2 Broadcast Functionaiity Test Procedure 1. Verify that Mapout is properly configured to communicate with multipie positions. 2. From the StarUPrograms/Mapout menu,select Mapsetup. 3. In order to more easily facilitate the verification of this test, set the corrtrollers for which you wish to broadcast to Y(yes)and hit apply. 4. Bring up the CAD Map Operations menu and select the Pan operation. 5. Enter some direction like N(for north)and hit execute. All maps should pan north. 6. Usin the address found on the ma and used in the test above, a ain select New call LUCENT TECHNOLOGIES-PROPRIETARY Use Pursuant to Company Instructions - Revisecl: 03117/99 Page 17 __ _.